镍基单晶高温合金发展趋势：新型研究技术驱动合金化设计

doi:10.12442/j.issn.1002-185X.20230443

首页 > 过刊浏览>2024年第53卷第8期 >2375-2389. DOI:10.12442/j.issn.1002-185X.20230443

镍基单晶高温合金发展趋势：新型研究技术驱动合金化设计
DOI:
                        10.12442/j.issn.1002-185X.20230443
                    
作者:
                        崔壮1崔壮
江苏大学材料科学与工程学院
在期刊界中查找
在百度中查找
在本站中查找
刘满平1刘满平
江苏大学材料科学与工程学院
在期刊界中查找
在百度中查找
在本站中查找
曾迎2曾迎
西南交通大学材料科学与工程学院 成都
在期刊界中查找
在百度中查找
在本站中查找
马辉1马辉
江苏大学材料科学与工程学院
在期刊界中查找
在百度中查找
在本站中查找
孙少纯1孙少纯
江苏大学材料科学与工程学院
在期刊界中查找
在百度中查找
在本站中查找
赵国平1赵国平
江苏大学材料科学与工程学院
在期刊界中查找
在百度中查找
在本站中查找

                    
作者单位:1.江苏大学材料科学与工程学院;2.西南交通大学材料科学与工程学院 成都
作者简介:
通讯作者:
中图分类号:
基金项目:国家自然科学基金-联合基金重点(项目号No.U22A20187)

Development Trend of Nickel-based Single Crystal Superalloys:Alloy Design Driven by New Research Technology

Author:

Cui Zhuang ^¹
Cui Zhuang
Jiangsu University
在期刊界中查找
在百度中查找
在本站中查找
Liu Manping ^¹
Liu Manping
Jiangsu University
在期刊界中查找
在百度中查找
在本站中查找
Zeng Ying ^²
Zeng Ying
Southwest Jiaotong University
在期刊界中查找
在百度中查找
在本站中查找
Ma Hui ^¹
Ma Hui
Jiangsu University
在期刊界中查找
在百度中查找
在本站中查找
Sun Shaochun ^¹
Sun Shaochun
Jiangsu University
在期刊界中查找
在百度中查找
在本站中查找
Zhao Guoping ^¹
Zhao Guoping
Jiangsu University
在期刊界中查找
在百度中查找
在本站中查找

Affiliation:

1.Jiangsu University;2.Southwest Jiaotong University

Fund Project:

摘要

图/表

访问统计

参考文献 [136]

相似文献

引证文献

资源附件

文章评论

摘要:

镍基单晶高温合金成分复杂且任一元素合金化作用不同,传统的 “经验-试错”及相图计算等合金化设计方法难以满足新型合金快速研发的需求。“材料基因组工程”可以快速获得材料成分-组织-工艺-性能之间的关系,极大提高了新型材料的研发速率,降低生产成本。本文简述了镍基单晶高温合金的合金化设计发展趋势,包括高通量制备与表征技术、机器学习等新型研究技术在合金化设计中的应用,并阐述了原子探针层析技术定量研究合金微观组织中元素特征的能力,以期为镍基单晶高温合金的合金化设计提供思路。

关键词:单晶高温合金;合金化;高通量;机器学习;原子探针

Abstract:

Nickel-based single crystal superalloys are composed of various elements, each of which has a unique strengthening effect. It is difficult to realize the rapid development of new alloys by traditional alloying design methods such as "trial and error" and phase diagram calculation. The relationship between composition, organization, technology and properties can be quickly obtained by "material genome engineering", which greatly improves the research and development rate of materials and reduces the production cost. The development trend of alloying design of Nickel-based single crystal superalloys is briefly described, including the application of new research technologies such as high throughput preparation and characterization technology and machine learning in alloying design. The ability of atom probe tomography (APT) to quantitatively study the content and distribution of elements in the microstructure of alloys is also expounded. It is expected that this paper can provide ideas for alloying design of Nickel-based single crystal superalloys.

Key words:single crystal superalloy; alloying; high-throughput; machine learning; atom probe tomograph

参考文献

[1] Günen A, Keddam M, Alkan S, et al. Materials Characterization[J], 2022, 186: 111778

[2] Liu P, Huang H Y, Jiang X, et al. Acta Materialia[J], 2022, 235: 118101

[3] Shi Z X(史振学), Liu S Z(刘世忠), Yue X D(岳晓岱), et al. Rare Metal Materials And Engineering (稀有金属材料与工程), 2023,52(6):1977-1984

[4] Liu Y C(刘永长), Zhang H J(张宏军), Guo Q Y(郭倩颖), et al. Acta Metallurgica Sinica(金属学报)[J], 2018, 54(11): 1653-1664

[5] Kunal, Sudhakar Rao P, Yunus Khan M, et al. Materials Today Proceedings[J], 2022, 62: 3707-3712

[6] De Cicco H, Luppo M I, Gribaudo L M, et al. Materials Characterization[J], 2004, 52(2): 85-92

[7] Huang Y S, Wang X G, Cui C Y, et al. Materials Science And Engineering: A[J], 2020, 773: 138886

[8] Lu S, Antonov S, Xue F, et al. Acta Materialia[J], 2021, 215: 117099

[9] Zhao Y S, Zhang Y H, Zhang Y, et al. Progress in Natural Science-Materials International[J], 2021: 641-648

[11] Wu Y T, Li C, Xia X C, et al. Journal of Materials Science Technology[J], 2021: 95-104

[12] Lu F, Antonov S, Lu S, et al. Acta Materialia[J], 2022, 233: 117979

[13] Wu R H, Zhao Y S, Yin Q, et al. Journal of Alloys and Compounds[J], 2021, 855: 157355

[14] Zhang Z G, Khong J C, Koe B, et al. Scripta Materialia[J], 2021, 193: 71-76

[15] Ding Q Q, Bei H B, Yao X, et al. Applied Materials Today[J], 2021, 23: 101061

[16] Guo J T(郭建亭). Beijing: Science Press(北京: 科学出版社)[M], 2010

[17] Li J R(李嘉荣), Xiong J C(熊继春), Tang D Z(唐定中). Beijing: National Defense Industry Press(北京: 国防工业出版社)[M], 2012

[18] Park J U, Jun S Y, Lee B H, et al. Additive Manufacturing[J], 2022, 52: 102680

[19] Jangali Satish G, Gaitonde V N, Kulkarni V N. Materials Today: Proceedings[J], 2021, 44: 1448-1454

[20] Yu Z, Zheng Y, Feng Q. Scripta Materialia[J], 2017, 128: 23-26

[21] Takebe Y, Yokokawa T, Kobayashi T, et al. Journal of the Japan Institute of metals[J], 2015, 79(4): 227-231

[22] Zhang L F(张龙飞), Jiang L(江亮), Zhou K C(周科朝), et al. The Chinses Journal of Nonferrous Metals (中国有色金属学报)[J], 2022, 32(3): 630-644

[23] Harris K, Erickson G L, Sikkenga S L, et al. Journal of Materials Engineering and Performance[J], 1993, 2(4): 481-487

[24] Walston S, Cetel A, MacKay R, et al. Proceedings of the International Symposium on Superalloys[J], 2004: 15-24

[25] Reed R C, Zhu Z, Sato A, et al. Materials Science And Engineering: A[J], 2016, 667: 261-278

[26] Xu J H, Li L F, Liu X G, et al. Materials Characterization[J], 2022, 187: 111857

[27] Xia W S, Zhao X B, Yue L, et al. Journal of Materials Science Technology[J], 2020, 44: 76-95

[28] Long H B, Liu Y N, Mao S C, et al. Intermetallics[J], 2018, 94: 55-64

[29] Xu B, Yin H Q, Jiang X, et al. Computational Materials Science[J], 2022, 202: 111021

[30] Sun X F(孙晓峰), Jin T(金涛), Zhou Y Z(周亦冑), et al. Materials China(中国材料进展), 2012, 31:1-11

[31] Zhang J C(张诚将), Hu W B(胡卫兵), Wang J P(王佳坡), et al. Rare Metal Materials And Engineering (稀有金属材料与工程), 2019,48(12):3930-3938

[32] Smith T M, Esser B D, Antolin N, et al. Acta Materialia[J], 2015, 100: 19-31

[33] Ge L, Zhang X N, Guo W G, et al. Journal of Alloys and Compounds[J], 2022, 911: 164989

[34] Song W, Wang X, Li J G, et al. Journal of Materials Science Technology[J], 2021, 89: 16-23

[35] Hao J H, Jing X G, Liu B, et al. Journal of Materials Research and Technology[J], 2022, 18: 4930-4945

[36] Nathal M V. Metallurgical Transactions A[J], 1987, 18(11): 1961-1970

[37] Luo L, Ru Y, Ma Y, et al. Materials Science And Engineering: A[J], 2022, 832: 142494

[38] Horst O M, Adler D, Git P, et al. Materials Design[J], 2020, 195: 108976

[39] Zhang Z W, Fu Q, Wang J, et al. International Journal of Solids and Structures[J], 2021, 228: 111128

[40] Li P, Li Q Q, Jin T, et al. Materials Science And Engineering: A[J], 2014, 603: 84-92

[41] Bortoluci Ormastroni L M, Mataveli Suave L, Cervellon A, et al. International Journal of Fatigue[J], 2020, 130: 105247

[42] Rouault-Rogez H, Dupeux M, Ignat M. Acta Metallurgica et Materialia[J], 1994, 42(9): 3137-3148

[43] Neu R W. International Journal of Fatigue[J], 2019: 268-278

[44] Meid C, Eggeler M, Watermeyer P, et al. Acta Materialia[J], 2019, 168: 343-352

[45] Giese S, Bezold A, Pr?bstle M, et al. Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science[J], 2020, 51(12): 6195-6206

[46] Menou E, Rame J, Desgranges C, et al. Computational Materials Science[J], 2019, 170: 109194

[47] Ai C, Xi L G, Wang B, et al. Intermetallics[J], 2020, 125: 106896

[48] Chen J Y, Feng Q, Cao L M, et al. Materials Science And Engineering: A[J], 2011, 528: 3791-3798

[49] Zhao P, Xie G, Chen C J, et al. Acta Materialia[J], 2022, 236: 118109

[50] Wang Y X, Zhao M X, Li Z, et al. Journal of Alloys and Compounds[J], 2022, 900: 163286

[51] Sun J, Liu J, Chen C, et al. Materials Characterization[J], 2022, 186: 111794

[52] Rae C M F, Karunaratne M S A, Small C J, et al. The Minerals, Metals Materials Society[J]. 2012: 767-776

[53] Wilson A S. Energy Materials[J], 2016,4: 1108-1118

[54] Meid C, Eggeler M, Watermeyer P, et al. Acta Materialia[J], 2019, 168: 343-352

[55] Moverare J J, Johansson S, Reed R C. Acta Materialia[J], 2009, 57(7): 2266-2276

[56] Thome P, Medghalchi S, Frenzel J, et al. Ultramicroscopy[J], 2019, 206: 112817

[57] He J Y, Scholz F, Horst O M, et al. Scripta Materialia[J], 2020, 185: 88-93

[58] Zhao Y S, Zhang J, Luo Y S, et al. Materials Science and Engineering: A[J], 2016, 672: 143-152

[59] Zhou Y Z, Volek A. Materials Science and Engineering: A[J], 2008, 479: 324-332

[60] Wang L, Xie G, Zhang J, et al. Scripta Materialia[J], 2006, 55(5): 457-460

[61] Wang F, Xu W L, Ma D X, et al. Journal of Alloys and Compounds[J], 2019, 792: 505-509

[62] Song X Q, Wang Y X, Zhao X X, et al. Journal of Alloys and Compounds[J], 2022, 911: 164959

[63] Jiang L, Zhang W Z, Xu Z F, et al. Materials Design[J], 2016, 112: 300-308

[64] Gao M, Wei R P. Scripta Metallurgica et Materialia[J], 1994, 30(8): 1009-1014

[65] Hu X B, Niu H Y, Ma X L, et al. Acta Materialia[J], 2018, 149: 274-284

[66] Wang L, Wang D, Liu T, et al. Materials Characterization[J], 2015, 104: 81-85

[67] Chen Q Z, Jones N, Knowles D M. Acta Materialia[J], 2002, 50(5): 1095-1112

[68] Al-Jarba K A, Fuchs G E. Materials Science and Engineering: A[J], 2004, 373: 255-267

[69] Tin S, Pollock T M. Materials Science and Engineering: A[J], 2003, 348(1-2): 111-121

[70] Long H B, Mao S C, Liu Y N, et al. Journal of Alloys and Compounds[J], 2018, 743: 203-220

[71] Liu S L, Yang H J. Materials Today Communications[J], 2022, 31: 103296

[72] Cui C T, Gu Y, Harada H, et al. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science[J], 2005, 36(11): 2921-2927

[73] Yin B, Xie G, Lou L H, et al. Scripta Materialia[J], 2019, 173: 1-4

[74] Xin T Z, Tang S, Ji F, et al. Journal of Alloys and Compounds[J], 2015, 641: 208-212

[75] Wang X G, Liu J L, Jin T, et al. Materials Design[J], 2014, 63: 286-293

[76] Tan M L(谭梅林), Wang C S(王长帅), Guo Y A(郭永安), et al. Acta Metallurgica Sinica(金属学报)[J], 2014, 50(10): 1260-1268

[77] Abbasi M, Kim D I, Shim J H, et al. Journal of Alloys and Compounds[J], 2016, 658: 210-221

[78] Zhao Y S, Zhang J, Luo Y S, et al. Acta Materialia[J], 2019, 176: 109-122

[79] Al-Jarba K A, Fuchs G E. Materials Science and Engineering: A[J], 2019, 760: 287-295

[80] Conduit B D, Jones N G, Stone H J, et al. Materials Design[J], 2017, 131: 358-365

[81] Long H B(龙海波). Beijing: Beijing University of Technology(北京工业大学)[D], 2019

[82] Barrows R G, Newkirk J B. Metallurgical Transactions[J], 1972, 3(11): 2889-2893

[83] Rideout S, Manly W D, Kamen E L, et al. JOM[J], 1951, 3(10): 872-876

[84] Barrows R G , Newkirk J B. Metallurgical Transactions A[J], 1972, 3:2889–2893

[85] Morinaga M, Yukawa N, Adachi H, et al. The Minerals, Metals and Materials Society[C], 2012: 523-532

[86] Zhang J S(张济山), Cui H(崔华), Huang Z Q(胡壮麒). Materials Science Engineering(材料科学与工程) [J], 1993, 03: 1-10

[87] Pyczak F, Mughrabi H. Intermetallics and Superalloys[M], 2006: 47-51

[88] Suárez Oca?o P, Fries S G, Lopez-Galilea I, et al. Materials Design[J], 2022, 217: 110593

[89] Xu B, Yin H Q, Jiang X, et al. Materials Today Communications[J], 2022, 30: 103164

[90] Crudden D J ,Babak Raeisinia. Metallurgical Materials Transactions A[J], 2013, 44(5):2418-2430

[91] Chen J B, Huo Q Y, Chen J Y, et al. Materials Science and Engineering: A[J], 2021, 799: 140163

[92] Zhang L F, Huang Z W, Pan Y M, et al. Modelling and Simulation in Materials Science and Engineering[J], 2019, 27: 065002

[93] Sun X Y, Zhang L F, Pan Y M, et al. Corrosion Science[J], 2020, 162: 108216

[94] Zhang L F, Huang Z W, Jiang L, et al. Materials Science and Engineering: A[J], 2019, 744: 481-489

[95] Reed R C, Tao T, Warnken N. Acta Materialia[J], 2009, 57(19): 5898-5913

[96] L?bel R, Thienhaus S, Savan A, et al. Materials Science and Engineering: A[J], 2008, 481-482: 151-155

[97] Zarnetta R, Kneip S, Somsen C, et al. Materials Science and Engineering: A[J], 2011, 528(21): 6552-6557

[98] Wen Z H, Hu Y L, Chen W M, et al. Journal of Alloys and Compounds[J], 2022, 896: 163061

[99] Su Y J(宿彦京), Fu H D(付华栋), Bai Y(白洋), et al. Acta Metallurgica Sinica (金属学报)[J], 2020, 56(10): 1313-1323

[100] Wang X(王薪), Zhu L L(朱礼龙), Fang J(方姣), et al. Science Technology Review(科技导报)[J]. 2015, 33(10): 79-86

[101] Zhao J C, Zheng X, Cahill D G. Materials Today[J], 2005, 8(10): 28-37

[102] Zhao J C. Journal of Materials Science[J], 2004, 39(12):3913-3925

[103] Zhao J C. Advanced Engineering Materials[J], 2001, 3: 143-147

[104] Campbell C E, Zhao J C, Henry M F. Materials Science and Engineering: A[J], 2005, 407(1-2): 135-146

[105] Zhu L L, Qi H Y, Jiang L, et al. Intermetallics[J], 2015, 64: 86-95

[106] Liu F, Wang Z X, Wang Z, et al. Materials Today Communications[J], 2020, 24: 101018

[107] Wang Z, Zhang L N, Li W F, et al. Scripta Materialia[J], 2020, 178: 134-138

[108] Wu S C(吴圣川), Wu Z(吴正凯), Kang G Z(康国政), et al. Journal of Mechanical Engineering(机械工程学报)[J], 2021, 57(16): 37-65

[109] Dao M, Chollacoop N, Van Vliet K J, et al. Acta Materialia[J], 2001, 49(19): 3899-3918

[110] Wen Z H, Wang Y Z, Ling J F, et al. Journal of Alloys and Compounds[J], 2021, 876: 160150

[111] Guan H D(关洪达), Li C J(李才巨), Gao P(高鹏), et al. Rare Metal Materials and Engineering(稀有金属材料与工程)[J]. 2019,48(12):4131-4140

[112] Husseini N S, Kumah D P, Yi J Z, et al. Acta Materialia[J], 2008, 56(17): 4715-4723

[113] Li B, Brody H D, Black D R, et al. Journal of Physics D: Applied Physics[J], 2006, 39(20): 4450-4456

[114] Biermann H, Ungár T, Von Grossmann B, et al. Materials Science and Engineering: A[J], 2004, 387-389: 918-922

[115] Napolitano R E, Schaefer R J. Jouranl of Materials Science[J]. 2000, 35: 1641–1659

[116] Royer A, Bastie P, Veron M. Acta Materialia[J], 1998, 46(15): 5357-5368

[117] Naragani D P, Shade P A, Kenesei P, et al. Acta Materialia[J], 2019, 179: 342-359

[118] Zhu Q, Wang C J, Qin H Y, et al. Materials Characterization[J], 2019, 156: 109875

[119] Jiménez M, Ludwig W, Gonzalez D, et al. Scripta Materialia[J], 2019, 162: 261-265

[120] Collins D M, D’Souza N, Panwisawas C. Scripta Materialia[J], 2017, 131: 103-107

[121] Collins D M, D’Souza N, Panwisawas C, et al. Acta Materialia[J], 2020, 200: 959-970

[122] Zhang Z W, Feng Y F, Tan Q, et al. Materials Design[J], 2019, 166: 107603

[123] Jaladurgam N R, Kabra S, Colliander M H. Materials Design[J], 2021, 209: 109954

[124] Chowdhury A, Kautz E, Yener B, et al. Computational Materials Science[J], 2016, 123: 176-187

[125] Kondo R, Yamakawa S, Masuoka Y, et al. Acta Materialia[J], 2017, 141: 29-38

[126] Venkatesh V, Rack H J. International Journal of Fatigue[J], 1999, 21(3): 225-234

[127] Liu Y, Wu J M, Wang Z C, et al. Acta Materialia[J], 2020, 195: 454-467

[128] Xu B, Yin H Q, Jiang X, et al. Journal of Materials Science Technology[J], 2023, 155: 175-191

[129] Hu R, Jin S B, Sha G. Progress in Materials Science[J], 2022, 123: 100854

[130] Bagot P A J, Silk O B W, Douglas J O, et al. Acta Materialia[J], 2017, 125: 156-165

[131] Qu P F, Yang W C, Qin J R, et al. Intermetallics[J], 2020, 119:106725

[132] Ai C, Li Q, Zhang J, et al. Intermetallics[J], 2021, 134: 107198

[133] Kontis P, Li Z M, Collins D M, et al. Scripta Materialia[J], 2018, 145: 76-80

[134] Wang C S, Wu Y S, Li H, et al. Materials Letters[J], 2022, 313: 131727

[135] Zhang J C, Huang T W, Lu F, et al. Scripta Materialia[J], 2021, 204: 114131

[136] Zhang J C, Lu F, Zhang C, et al. Vacuum[J], 2022, 197: 110863

[137] Yang W C, Liu C, Qu P F, et al. Materials Characterization[J], 2022, 186: 111809

引用本文

崔壮,刘满平,曾迎,马辉,孙少纯,赵国平.镍基单晶高温合金发展趋势：新型研究技术驱动合金化设计[J].稀有金属材料与工程,2024,53(8):2375~2389.[Cui Zhuang, Liu Manping, Zeng Ying, Ma Hui, Sun Shaochun, Zhao Guoping. Development Trend of Nickel-based Single Crystal Superalloys:Alloy Design Driven by New Research Technology[J]. Rare Metal Materials and Engineering,2024,53(8):2375~2389.]
DOI：10.12442/j. issn.1002-185X.20230443

复制

文章指标

点击次数:
下载次数:
HTML阅读次数:
引用次数:

历史

收稿日期:2023-07-17
最后修改日期:2023-11-16
录用日期:2023-11-17
在线发布日期: 2024-08-20
出版日期: 2024-08-08

首页

期刊简介

编委会

投稿指南

过刊浏览

联系我们

English

引用本文

文章指标

历史

首 页

期刊简介

编委会

投稿指南

过刊浏览

联系我们

English

引用本文

文章指标

历史

首页