+高级检索
影响多孔钨孔隙度的因素
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TF125.6

基金项目:


Study of Some Factors Effecting the Porosity of Porous Tungsten
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究了粉末粒度,压制压力及烧结温度等对多孔钨孔隙度的影响,结果表明,对同一粒度粉末压坯,孔隙随着压制压力的增大而减少;在相同压力下,粗粉压坯的孔隙度小于细粉压坯的孔隙度。当烧结温度和烧结时间相同时,细粉多孔钨的孔隙度要小于粗粉多孔钨的孔隙度,对同粒度粉末,压坯孔隙度随烧结温度升高而减小。

    Abstract:

    Some factors effecting the porosity of porous tungsten, such as powder size, press pressure, sintering temperature, and so on, are discussed in detail. It is found that the porosity of the pressed blank is not only connected with the press pressure, but also with the size of tungsten powder. For the same size of powder, the porosity of the pressed blank decreases with the increase of pressing pressure. The porosity of pressed blank of coarse powder is smaller than that of fine powder for the same pressure. If the sintering temperature and time are the same, the porosity of porous tungsten made by fine powder is smaller than that of the coarse one. For the same size powder, the porosity of the pressed blank decreases with increase of sintering temperature. Therefore, the powder size and sintering temperature are major factors for the porosity of porous tungsten. The smaller the size of the powder and the higher the sintering temperature, the less the porosity of porous tungsten.

    参考文献
    相似文献
    引证文献
引用本文

滕修仁 张晗亮.影响多孔钨孔隙度的因素[J].稀有金属材料与工程,1998,(6):379~380.[Teng Xiuren, Zhang Hanliang. Study of Some Factors Effecting the Porosity of Porous Tungsten[J]. Rare Metal Materials and Engineering,1998,(6):379~380.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: