+高级检索
锂离子电池正极材料LiNixMn2-xO4的制备和电化学性能研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TM911

基金项目:

中国博士后科学基金资助(2004035022)


Synthesis and Electrochemical Performance of LiNixMn2-xO4 Spinel as Cathode Material for Lithium Ion Batteries
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用固相反应和湿化学两种方法合成了材料LiNixMn2-xO4含Ni量影响材料在4.7V高电压区间的容量,用固相反应法制备的LiNi0.5Mn1.5O4中含有杂相物质,首次放电容量可以达到118mAh/g,其中高电压区的容量为100mAh/g,循环50次的容量保持率为97%。用湿化学法可以得到纯相的LiNi0.5Mn1.5O4,首次放电容量为140mAh/g,其中高电压区的容量为125mAh/g,循环50次后,容量仍能达到133mAh/g,容量保持率为95%。XPS检测结果表明,湿化学法制备的LiNi0.5Mn1.5O4中Mn为+4价,Ni为+2价。

    Abstract:

    Solid-state method and wet method were employed to synthesize spinel compounds LiNixMn2-xO4.The experimental results indicate that the capacity of high voltage at 4.7 V increase with the increase of amount of Ni. There are impurities in LiNixMn2-xO4 which were made by solid-state method. The sample LiNi0.5Mn1.5O4 had a capacity of 121 mAh/g at first cycle, in which 100 mAh/g was at high voltage range. Its cycle retention rate after 50 cycles was over 92%. The LiNi0.5Mn1.5O4 synthesized by wet method show a single spinel phase without impurity phase. It deliver a discharge capacity of 140 mAh/g in the first cycle, in which 125 mAh/g was at high voltage range. Its cycle retention rate after 50 cycles was over 96%. The XPS experiment results indicate that the oxidation states of Ni and Mn in LiNi0.5Mn1.5O4 made by wet method are +2 and +4 respectively.

    参考文献
    相似文献
    引证文献
引用本文

刘国强 其鲁 闻雷.锂离子电池正极材料LiNixMn2-xO4的制备和电化学性能研究[J].稀有金属材料与工程,2006,35(2):299~302.[Liu Guoqiang, Qi Lu, Wen Lei. Synthesis and Electrochemical Performance of LiNixMn2-xO4 Spinel as Cathode Material for Lithium Ion Batteries[J]. Rare Metal Materials and Engineering,2006,35(2):299~302.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2004-11-26
  • 最后修改日期:2005-03-15
  • 录用日期:
  • 在线发布日期:
  • 出版日期: