+高级检索
[011]取向镍基单晶合金高温蠕变期间γ′相定向粗化行为研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(50171045)


Phase Morphology Evolution of a Single Crystal Nickel-Base Superalloy in the [011] Direction During the Tensile Creep
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究了980 ℃, 200 MPa拉伸蠕变期间[011]取向镍基单晶高温合金中γ′相的演化方式。采用有限元方法计算了单晶合金在有/无外加载荷时Von Mises应力及弹性应变能密度在γ和γ′两相中的分布。结果表明:沿[011]取向施加拉伸应力时,与应力轴呈45°角基体通道(roof)的Von Mises应力远高于与应力轴平行的基体通道(gable)中的Von Mises应力,两通道中应变能密度的差异驱动γ′相形成元素从变形较大的通道向变形较小的通道扩散,而γ相形成元素反向扩散,导致γ′相沿[010]和[1

    Abstract:

    By means of finite elements analysis,an investigation has been made for the directional coarsening manners and evolutional rule of γ′ precipitates in a single crystal nickel-base superalloy with [011] orientation during tensile creep at 980 ℃ and 200 MPa. Results show that the von Mises stress in the matrix channel that is 45° with respect to the loading direction is larger than that in the matrix channel that is parallel to the loading direction when external loads applied along the [011] direction. The strain energy change in two kinds of matrix channel is the driving force for the γ′ directional coarsening, the γ′ phase developed along the [010] and [100] and perpendicular to the [001] orientations, and formed lamellar raft morphology inclined 45° angle to the tensile stress axis

    参考文献
    相似文献
    引证文献
引用本文

水 丽,金 涛,田素贵,胡壮麒.[011]取向镍基单晶合金高温蠕变期间γ′相定向粗化行为研究[J].稀有金属材料与工程,2009,38(5):826~829.[Shui Li, Jin Tao, Tian Sugui, Hu Zhuangqi. Phase Morphology Evolution of a Single Crystal Nickel-Base Superalloy in the [011] Direction During the Tensile Creep[J]. Rare Metal Materials and Engineering,2009,38(5):826~829.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2008-06-14
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: