+高级检索
Ga、Al对Sn-Zn钎料耐蚀及高温抗氧化性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用侵蚀失重法研究Ga、Al对Sn-9Zn钎料在3.5%NaCl水溶液中耐腐蚀性的影响。结果表明,添加Ga元素后,腐蚀产物的粘附性提高,均匀覆盖在钎料表面上,提高了钎料的耐蚀性能;添加Al以后,Zn和Al被选择性腐蚀,腐蚀随着Al含量的增加而加剧。采用热重分析(TGA)和俄歇电子能谱(AES)研究Ga、Al对Sn-9Zn钎料高温抗氧化性的影响。结果表明,Ga可在钎料表面形成一层集肤层;Al可在钎料表面形成一层致密的氧化膜,两者均可阻挡空气中的氧向钎料内部扩散,从而大大改善钎料的高温抗氧化性。

    Abstract:

    Effects of Ga and Al additions on the corrosion resistance of Sn-9Zn lead free solder in 3.5% NaCl solution were researched by erosion mass loss evaluation. Effects of the additions on high-temperature oxidation resistance of the solder were investigated by TGA and AES. Results indicate that the corrosion resistance of Sn-Zn solders is improved by addition of Ga, for the corrosion products exhibit better adhesiveness on the solder surface after adding Ga; however, with Al addition, the corrosion resistance deteriorates for the selective erosion of Al and Zn. The TGA results show that the high-temperature oxidation resistance of Sn-9Zn solder is observably improved by adding Ga or Al; the AES analysis shows that Ga could form a protective skin on the solder surface, while Al can form a dense protective oxidation layer, both of which can hinder diffusion of the oxygen to the inner.

    参考文献
    相似文献
    引证文献
引用本文

王 慧,薛松柏,陈文学,马秀萍. Ga、Al对Sn-Zn钎料耐蚀及高温抗氧化性能的影响[J].稀有金属材料与工程,2009,38(12):2187~2190.[Wang Hui, Xue Songbai, Chen Wenxue, Ma Xiuping. Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China[J]. Rare Metal Materials and Engineering,2009,38(12):2187~2190.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2008-12-10
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: