+高级检索
低弹性模量Ti-27Nb-8Zr医用钛合金组织与力学性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Microstructure and Mechanical Properties of Biomedical Ti-27Nb-8Zr Alloy with Low Elastic Modulus
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用光学显微镜、扫描电镜和X射线衍射仪研究Ti-27Nb-8Zr(质量分数, %)医用钛合金固溶后在不同时效温度下组织的变化规律,重点讨论不同显微组织对合金弹性模量和强度的影响。结果表明,固溶处理后,合金组织由β+α”两相构成,具有相对低的弹性模量和强度;时效后,组织中包含β、α、ω三相,弹性模量和强度显著升高,随着时效温度的升高,组织长大,弹性模量和强度降低

    Abstract:

    Microstructure evolutions of Ti-27Nb-8Zr (mass fraction, %) biomedical alloy subjected to different aging treatments after solution treatment were studied by optical microscopy, scanning electron microscopy and X-ray diffraction, and the influence of various microstructures on the elastic modulus and tensile strength was discussed. The results indicate that the Ti-27Nb-8Zr alloy after solution treatment consists of β+α” phases and has relatively lower elastic modulus and tensile strength, while for the alloy after aging treatment, it contains β, α and ω phases and exhibits significantly higher elastic modulus and tensile strength. With increasing of the aging temperature, the microstructure became coarser and the elastic modulus and tensile strength became lower. It is recommended that a Ti-27Nb-8Zr alloy with comparatively lower elastic modulus (85.5 GPa) and optimal comprehensive properties can be obtained by adopting following process: solution treatment at 800 oC for 1 h and then quenched, aged at 500 oC for 12 h then air-cooled

    参考文献
    相似文献
    引证文献
引用本文

赵 杰,段洪涛,李海涛.低弹性模量Ti-27Nb-8Zr医用钛合金组织与力学性能[J].稀有金属材料与工程,2010,39(10):1707~1710.[Zhao Jie, Duan Hongtao, Li Haitao. Microstructure and Mechanical Properties of Biomedical Ti-27Nb-8Zr Alloy with Low Elastic Modulus[J]. Rare Metal Materials and Engineering,2010,39(10):1707~1710.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2009-09-10
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: