+高级检索
自支撑GaN厚膜制备及其光学性能研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家“863”项目(2006AA03A143);国家自然科学基金(60806001);中科院创新计划(ISCAS2008T03)


Preparation and Optical Performance of Freestanding GaN Thick Films
Author:
Affiliation:

Fund Project:

江西省科技厅攻关项目(z02727)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用镀Ti插入层在氢化物外延设备中制备了高质量自支撑GaN厚膜。X射线衍射测试发现(0002)峰摇摆曲线的半高宽为260 arcsec;5 K下样品带边发光峰的半高宽为3 meV,室温下样品的带边发光峰也只有20 meV,并且在室温的PL谱中观察不到黄光带;扫描电子显微镜观察显示,腐蚀后的自支撑GaN厚膜表面有位错延伸形成的六角坑,并估算出样品位错密度约为2.1×l07 cm-2。这些结果说明镀Ti插入层有助于提高GaN外延层的晶体质量。通过Raman和低温荧光分析,可以看出自支撑GaN厚膜表面应力已经完全释放。研究了不同温度下样品的荧光特性,证明得到的无应力自支撑GaN厚膜具有很好的晶体质量和光学质量

    Abstract:

    High-quality freestanding GaN thick films were deposited by hydride vapor phase epitaxy (HVPE) on sapphire wafer with a thin Ti film on the top. The FWHM of (0002) peaks in the X-ray rocking curve profile is 260 arcsec. The FWHM of band edge emission peaks at 5 K and room temperature are 3 meV and 20 meV, respectively. The yellow spectral region is not observed at room temperature. The surface morphology of GaN films was characterized by scanning electron microscope; results show that hexagonal pits from dislocation extension exist on the surface of freestanding GaN thick films after corrosion and their dislocation density is estimated as 2.1×l07 cm-2. All these results prove that the Ti metal interlayer improves the crystalline quality of GaN epitaxial layer. The results of Raman and PL show that the surface stress of the GaN films is released completely. Finally, the temperature-dependent PL was investigated; the result also proves that the stress-free freestanding GaN thick films have high crystalline quality and optical quality

    参考文献
    相似文献
    引证文献
引用本文

胡 强,魏同波,段瑞飞,羊建坤,霍自强,卢铁城,曾一平.自支撑GaN厚膜制备及其光学性能研究[J].稀有金属材料与工程,2010,39(12):2169~2172.[Hu Qiang, Wei Tongbo, Duan Ruifei, Yang Jiankun, Huo Ziqiang, Lu Tiecheng, Zeng Yiping. Preparation and Optical Performance of Freestanding GaN Thick Films[J]. Rare Metal Materials and Engineering,2010,39(12):2169~2172.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2009-12-05
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: