+高级检索
DZ125定向凝固镍基高温合金组织与熔体超温处理时间的相关性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金项目(50931004);国家重点基础研究发展计划项目(2006CB605202, 2010CB631202);国家高技术研究发展计划项目(2007AA03Z552)资助


Relationship between Microstructure and Melt Superheating Time for Directionally Solidified DZ125 Superalloys
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用熔体超温处理方法,通过改变熔体超温处理时间研究定向凝固镍基高温合金DZ125凝固组织的演化规律。结果表明:熔体超温处理时间由15 min延长到30 min可以细化枝晶、减小偏析。然而,进一步延长熔体超温处理时间至60 min,枝晶却略微粗化。熔体超温处理15 min时,碳化物形貌为草书体,而熔体超温处理时间大于30 min时碳化物则主要为非连续性棒状和块状。造成这种现象的主要原因是熔体超温处理时间的变化影响到熔体状态,进而影响到凝固组织。

    Abstract:

    The solidification microstructure evolution of Ni-based superalloy DZ125 with melt superheating time was investigated. The results show that the dendrite arms are evidently refined and the segregation is reduced with the increase of melt superheating time when the melt superheating time is less than 30 min. However, further prolonging melt superheating time, the dendrite arms become coarser lightly. The morphology of carbide presents from script-like to blocky and nodule when the melt superheating time increases from 15 to 30 min. But when melt superheating treatment time is prolonged to 60 min, the morphology of carbide is still mainly blocky and nodule. The reason of solidification microstructure evolution is the change of melt structure with the prolonging of melt superheating time.

    参考文献
    相似文献
    引证文献
引用本文

王常帅,张 军,刘 林,傅恒志. DZ125定向凝固镍基高温合金组织与熔体超温处理时间的相关性[J].稀有金属材料与工程,2011,40(2):307~310.[Wang Changshuai, Zhang Jun, Liu Lin, Fu Hengzhi. Relationship between Microstructure and Melt Superheating Time for Directionally Solidified DZ125 Superalloys[J]. Rare Metal Materials and Engineering,2011,40(2):307~310.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2010-03-25
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: