+高级检索
由FeV80合金制备的V28Ti32Cr28Mn6Fe6合金的组织结构及吸放氢特性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Microstructure and Absorption/Desorption Properties of V28Ti32Cr28Mn6Fe6 Alloy Prepared from FeV80 Alloy
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过XRD、SEM/EDS及PCT测试研究了由FeV80合金制备的V28Ti32Cr28Mn6Fe6合金的组织结构及吸放氢特性。该合金由bcc相和C14 Laves第二相构成。由于合金中氧含量 (0.83%, 质量分数)较高,因而吸放氢容量较低,动力学性能较差。通过添加一定量的稀土元素La (1%~10%, 质量分数),可显著降低合金中的氧含量,从而提高其动力学性能和吸放氢容量。当La的添加量达到4.0%时,合金具有最佳的吸放氢性能,吸氢量达到3.62%,放氢量达到2.13%;合金氢化物的生成焓为(–40.0±1) kJ/mol·H2

    Abstract:

    The phase, microstructure and absorption/desorption properties of V28Ti32Cr28Mn6Fe6 alloy prepared from FeV80 alloy were researched by XRD, SEM/EDS and PCT measurement. The prepared alloy consists of two phases, bcc main phase and C14 Laves minor phase. This alloy shows low absorption/desorption capacities and poor absorption kinetics due to the high oxygen content of 0.83wt% originated from the FeV80 source. After addition of rare-earth metal of La, the oxygen content is obviously decreased, and the mechanical properties and absorption/desorption capacities are markedly increased. The addition of 4.0wt% La brings about the optimal hydrogen absorption and desorption properties, i.e. an absorption capacity of 3.62wt% H and desorption capacity of 2.13wt% H at 293 K. The formation enthalpy of the hydride of the 4.0wt% La containing alloy is –40.0±1 kJ/mol·H2.

    参考文献
    相似文献
    引证文献
引用本文

王林元,段蜀波.由FeV80合金制备的V28Ti32Cr28Mn6Fe6合金的组织结构及吸放氢特性[J].稀有金属材料与工程,2011,40(3):462~465.[Wang Linyuan, Duan Shubo. Microstructure and Absorption/Desorption Properties of V28Ti32Cr28Mn6Fe6 Alloy Prepared from FeV80 Alloy[J]. Rare Metal Materials and Engineering,2011,40(3):462~465.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2010-10-28
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: