+高级检索
LaNixMn0.26Aly合金的吸放氢性能研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家“973”项目(2010CB631305);国家自然科学基金(50776094)


Hydrogen Absorption/Desorption Properties of LaNixMn0.26Aly Alloys
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    对LaNixMn0.26Aly合金的储氢性能进行了研究。结果表明,与LaNi4.61Mn0.26Al0.13合金相比,LaNi4.5Mn0.26Al0.13合金的晶格常数和晶胞体积均变大,吸氢平台压力略有降低,放氢平台压力基本不变,滞后因子有所改善,储氢容量略有减少,氢化物生成焓绝对值变大,氢化物稳定性增加;对于LaNi4.4Mn0.26Al0.34合金,Al替代部分Ni使合金的晶格常数和晶胞体积变大,吸放氢平台压力明显降低,滞后因子明显改善,吸氢动力学性能显著提高,氢化物生成焓绝对值变大,氢化物更加稳定,但储氢容量有所减少

    Abstract:

    The hydrogen storage properties of LaNixMn0.26Aly alloys were investigated. Results show that when y=0.13, the lattice parameters (a and c) and the lattice volume V are increased, the absorption plateau pressure is slightly decreased, the desorption plateau pressure is almost the same and the hysteresis factor is improved, while the hydrogen intake capacity is impaired, and the stability of metal hydride is enhanced with decrease of the x. As for LaNi4.4Mn0.26Al0.34 alloy, the lattice parameters and cell volumes are increased, the absorption/desorption plateau pressure is obviously decreased, the hysteresis factor and the absorption kinetics are greatly improved, while the hydrogen content is obviously impaired with Al substituting for partial Ni

    参考文献
    相似文献
    引证文献
引用本文

李慎兰,陈 伟,罗 刚,韩兴博,陈德敏,杨 柯,陈维平. LaNixMn0.26Aly合金的吸放氢性能研究[J].稀有金属材料与工程,2013,42(5):962~966.[Li Shenlan, Chen Wei, Luo Gang, Han Xingbo, Chen Demin, Yang Ke, Chen Weiping. Hydrogen Absorption/Desorption Properties of LaNixMn0.26Aly Alloys[J]. Rare Metal Materials and Engineering,2013,42(5):962~966.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2012-04-01
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: