+高级检索
反应合成制备纳米Al2O3-弥散强化铜合金特性研究
DOI:
作者:
作者单位:

北京有色金属研究总院,北京有色金属研究总院,北京有色金属研究总院,北京有色金属研究

作者简介:

通讯作者:

中图分类号:

TG146.1

基金项目:

国家自然科学基金项目(面上项目,重点项目,重大项目)


Characteristics of nano-alumina particles dispersion strengthened copper fabricated by reaction synthesis
Author:
Affiliation:

GRINM,General Research Institute For Nonferrous Metals,General Research Institute For Nonferrous Metals,General Research Institute For Nonferrous Metals

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用反应合成工艺制备了纳米Al2O3-弥散强化铜合金,研究结果表明:铜基体内部均匀、弥散分布着直径大小约为10 nm的纳米γ-Al2O3颗粒,纳米颗粒与基体间界面清洁,且存在如下的晶体学位向关系:(002)Cu // γ-Al2O3,[110]Cu// [011]γ-Al2O3。该工艺制备的合金性能优异,室温抗拉强度和屈服强度可达570 MPa和475 MPa,抗软化温度高于900 ℃,同时合金的导电率和洛氏硬度值分别为85% IACS和86 HRB。

    Abstract:

    Alumina dispersion strengthened copper (ADSC) composite was prepared by reaction synthesis (RS) process. Studies show that nano-sized γ-Al2O3 particles of about 10 nm in diameter are homogeneously distributed in copper matrix. A coherent interface relationship with (002)Cu // γ-Al2O3,[110]Cu// [011]γ-Al2O3 characterizes along the explored interfaces of the composites. The composites obtain high tensile properties. Namely the tensile strength can reach to 570 MPa and the yield strength can reach to 475MPa at room temperature. Meanwhile, the softening temperature is higher than 1173 K. The electrical conductivity of sample is 85% IACS and the Rockwell hardness can reach to 86 HRB.

    参考文献
    相似文献
    引证文献
引用本文

张雪辉,林晨光,崔舜,李增德.反应合成制备纳米Al2O3-弥散强化铜合金特性研究[J].稀有金属材料与工程,2016,45(4):893~896.[zhangxuehui, lin chenguang, cuishun, li zengde. Characteristics of nano-alumina particles dispersion strengthened copper fabricated by reaction synthesis[J]. Rare Metal Materials and Engineering,2016,45(4):893~896.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2014-02-17
  • 最后修改日期:2014-03-10
  • 录用日期:
  • 在线发布日期: 2016-06-27
  • 出版日期: