+高级检索
压铸态镁/铝异种金属搅拌摩擦焊接接头组织及性能
DOI:
作者:
作者单位:

重庆大学 材料科学与工程学院

作者简介:

通讯作者:

中图分类号:

基金项目:

重庆市基础研究与前沿探索项目,项目号cstc2018jcyjA3203; 留学人员回国创业创新支持计划专项,项目号201412150129.


Microstructure and properties of high-pressure die casting Mg/Al dissimilar friction stir welded joints
Author:
Affiliation:

College of Materials Science and Engineering,Chongqing University

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    对3mm厚压铸态AZ91D镁合金和压铸态ADC12铝合金进行了搅拌摩擦焊,采用金相显微镜、扫描电镜、X射线衍射、万能拉伸试验机等分析了的接头的微观组织和力学性能。主要结论为:1)铝合金置于前进侧,前进速度为40mm/min,转速为900-1300r/min时,可获得成型良好的焊接接头;2)接头焊核区域镁铝合金相互混合,发生机械互锁,组织呈现条带状特征;母材中粗大铸态枝晶明显细化,非镁/铝基体相主要有Si、Mg2Al3、Mg17Al12和Mg2Si,颗粒状尺寸随转速的增加呈先降后增趋势; 3)接头平均抗拉强度随转速增加呈现先增大后减小的趋势;断裂均发生在前进侧热机影响区和焊核的交界处。

    Abstract:

    The high-pressure die castings of AZ91 Mg and ADC12 Al alloys of 3 mm were welded by frciton stir welding. OM、SEM/EDS、XRD and universal tensile testing machine were used to analyze the microstructure and tensile property of the joint. The main conclusins are: 1). Defect-free welded joints were obtained when ADC12 die-casting aluminum alloy was placed in advancing side with a welding speed of 40mm/min and the rotational speeds of 900-1300r/min. 2). Mg and Al alloys are mixed with each other in the nugget zone, and mechanical interlocking occurs. In the parent material, the thick and large casting dendrites are obviously refined, and the non-Mg/Al matrix phases mainly include Si, Mg2Al3, Mg17Al12 and Mg2Si. 3) The average tensile strength of the joints increased first and then decreased with the increase of rotating speed. Fracture occurred at the interface of the thermal affceted zone and the nugget zone in advancing side.

    参考文献
    相似文献
    引证文献
引用本文

李佩琪,游国强,徐轩曦,丁煜瀚,文恒玉,郭伟.压铸态镁/铝异种金属搅拌摩擦焊接接头组织及性能[J].稀有金属材料与工程,2019,48(5):1551~1558.[LI Peiqi, YOU Guoqiang, XU Xuan-xi, DING Yu-han, Wen Heng-yu, Guo Wei. Microstructure and properties of high-pressure die casting Mg/Al dissimilar friction stir welded joints[J]. Rare Metal Materials and Engineering,2019,48(5):1551~1558.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2018-09-23
  • 最后修改日期:2018-10-29
  • 录用日期:2018-11-08
  • 在线发布日期: 2019-06-04
  • 出版日期: