徐莽,刘国怀,张相龙,李泽宇,王丙兴,王昭东,郭景杰.定向凝固DZ4125柱晶高温合金晶粒生长过程组织演化及其竞争生长研究[J].稀有金属材料与工程,2021,50(4):1350~1358.[XU Mang,LIU Guohuai,ZHANG Xianglong,LI Zeyu,WANG Bingxing,WANG Zhaodong,GUO Jingjie.Microstructure evolution and Competitive Growth during Grain Growth of Directionally Solidified Column Crystal DZ4125 Superalloy[J].Rare Metal Materials and Engineering,2021,50(4):1350~1358.]
定向凝固DZ4125柱晶高温合金晶粒生长过程组织演化及其竞争生长研究
投稿时间:2020-06-11  修订日期:2020-07-18
中文关键词:  定向凝固  DZ4125合金  微观组织  竞争生长
基金项目:国家重点研发计划(2016YFB0301200,2016YFB0300603);国家自然科学基金(51504060);中央高校基本科研业务费(N160713001)
中文摘要:
      采用Bridgman定向凝固方法制备DZ4125柱晶高温合金定向试棒,研究在恒定抽拉速率下定向晶粒生长过程微观组织演化及晶粒间竞争生长行为。结果表明,随着生长高度的增加,固液界面处温度梯度逐渐降低,一次枝晶间距增加。同时,γ′相尺寸随着生长高度的增加逐渐减小,且γ′相形貌由不规则的蝴蝶状向立方体状、近圆状转变。γ+γ′共晶组织和碳化物大多分布在枝晶间区域,且含量随着生长高度的增加逐渐增加。此外,由于定向凝固过程中晶粒的竞争生长,随着生长高度的增加柱状晶数量明显减少;在具有凸固液界面生长条件下晶粒表现为向近炉壁侧倾斜发散生长。
Microstructure evolution and Competitive Growth during Grain Growth of Directionally Solidified Column Crystal DZ4125 Superalloy
英文关键词:directional solidification  DZ4125 alloy  microstructure  competitive growth
英文摘要:
      The directionally solidified column crystal DZ4125 superalloy was prepared by means of Bridgman directional solidification. The microstructure evolution and the competitive growth of oriented crystal at a constant withdrawal rate were studied. The results showed that the temperature gradients of solid-liquid interface gradually decreased and the primary dendrite spacing increased, as the growth height increased. At the same time, the sizes of the γ′ precipitates gradually decreased and their morphologies changed from irregular butterfly shape into regular cube and sphere shapes. The contents of γ+γ′ eutectics and carbides, which were mostly distributed in the interdendritic areas, increased gradually. Moreover, due to the competitive growth proceeding, the number of columnar crystals decreased significantly with the increase of growth height. With the convex solid-liquid interface, the crystals diverged towards the furnace wall.
作者单位E-mail
徐莽 东北大学轧制技术及连轧自动化国家重点实验室 xumang99@126.com 
刘国怀 东北大学轧制技术及连轧自动化国家重点实验室 liugh@ral.neu.edu.cn 
张相龙 东北大学轧制技术及连轧自动化国家重点实验室 578276065@qq.com 
李泽宇 东北大学轧制技术及连轧自动化国家重点实验室  
王丙兴 东北大学轧制技术及连轧自动化国家重点实验室  
王昭东 东北大学轧制技术及连轧自动化国家重点实验室  
郭景杰 哈尔滨工业大学材料科学工程学院  
摘要点击次数: 117
全文下载次数: 45
查看全文  查看/发表评论    HTML
关闭