+高级检索
固溶和时效对Ti2041合金组织与性能的影响
作者:
作者单位:

南昌航空大学

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助(项目号51464035)


Effects of solution and aging treatment on microstructure and properties of Ti2041 alloy
Author:
Affiliation:

Nanchang Hangkong University

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究了不同温度的固溶和时效工艺对Ti2041合金组织和硬度的影响。结果表明:当固溶温度为700℃时,随着保温时间增加,组织中初生α相的含量逐渐增多,晶粒尺寸逐渐增大;当固溶温度为750℃时,随保温时间增加,发生了静态再结晶,且有次生α相析出,晶粒尺寸也逐渐增大;当固溶温度为800℃时,晶粒内部出现α′马氏体,形貌由等轴状变为板条状。在不同固溶温度下硬度值变化也不同。在固溶温度为700℃时,随着保温时间的增加,硬度值从301.6HV降到285.2HV;在固溶温度为750℃时,硬度值随着保温时间的增加先增长后降低,最大值为308.2 HV;在固溶温度为800℃时,硬度值随着保温时间的增加逐渐变大,最大值为331.4 HV。在经时效处理后,不同时效温度下均出现了次生α相。随时效温度的升高,次生α相尺寸越小,显微硬度值逐渐增大,最大值达到了451.75HV,主要强化机制为第二相(次生α相)弥散强化。

    Abstract:

    The effects of solution and aging at different temperatures on the microstructure and hardness of Ti2041 alloy were studied. The results show that: at the solution temperature of 700℃, the content of primary α phase and the grain size increase gradually, with the increase of holding time; At the solution temperature of 750℃, with the increase of holding time, it can be seen that there are secondary α phases in the microstructure and static recrystallization occurs. The grain size increases gradually; At the solution temperature of 800℃, α′ martensite appears in the microstructure, and the morphology changes from equiaxed to lath. The change of hardness value is also different under different solution temperature. At the solution temperature of 700℃,with the increase of holding time, the hardness value decreases from 301.6HV to 285.2HV;At the solution temperature of 750℃,with the increase of holding time, the hardness value increases first and then decreases. The maximum value is 308.2HV;At the solution temperature of 800℃,with the increase of holding time, the hardness value increases gradually and the maximum value is 331.4HV. After aging treatment, secondary α phase appeared in the microstructure at different aging temperatures. With the increase of aging temperature, the size of secondary α phase decreases. The hardness value increases gradually and the maximum value is 451.75HV.The main strengthening mechanism is the second phase(secondary α phase) dispersion strengthening.

    参考文献
    相似文献
    引证文献
引用本文

周璇,王克鲁,鲁世强,李鑫.固溶和时效对Ti2041合金组织与性能的影响[J].稀有金属材料与工程,2021,50(6):2155~2162.[Zhou Xuan, Wang Kelu, Lu Shiqiang, Li Xin. Effects of solution and aging treatment on microstructure and properties of Ti2041 alloy[J]. Rare Metal Materials and Engineering,2021,50(6):2155~2162.]
DOI:10.12442/j. issn.1002-185X.20200519

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2020-07-20
  • 最后修改日期:2020-09-16
  • 录用日期:2020-09-18
  • 在线发布日期: 2021-07-07
  • 出版日期: 2021-06-30