+高级检索
固相烧结SiC凝胶注模用水基浆料流变性能的研究
DOI:
作者:
作者单位:

东北大学 材料各向异性与织构教育部重点实验室,东北大学 材料各向异性与织构教育部重点实验室,东北大学 材料各向异性与织构教育部重点实验室,东北大学 材料各向异性与织构教育部重点实验室

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助(项目号51272039,51032007,50872018,21201030,21471026),中央高校基本科研业务费资助(项目号N130810003)


Study on the Rheological Property of Aqueous and Solid-State-SinteredSiC Slurry for Gelatin Gelcasting
Author:
Affiliation:

Key Laboratory for Anisotropy and Texture of Materials of Ministry of Education ATM,Northeastern University,Key Laboratory for Anisotropy and Texture of Materials of Ministry of Education ATM,Northeastern University,Key Laboratory for Anisotropy and Texture of Materials of Ministry of Education ATM,Northeastern University,Key Laboratory for Anisotropy and Texture of Materials of Ministry of Education ATM,Northeastern University

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文以亚微米SiC、明胶、TMAH为主要原料,研究了凝胶注模用水基SiC浆料的流变性能,探讨了pH值、烧结助剂、分散剂、明胶溶液浓度和固含量对于浆料流变性能的影响。结果表明:当pH值为12时浆料的流动性最好;烧结助剂的加入略微提高浆料的粘度;加入0.6 wt% TMAH时,浆料粘度最低;明胶浓度对粘度有显著影响,浆料的粘度随明胶溶液含量的增加而降低;粘度随着固含量的增加而升高。pH为12、分散剂含量为0.6 wt%、加入20 wt% 浓度为10 wt% 的明胶时,可得到固含量为55 wt%、粘度为132 mPa.s 且利于凝胶注模的水基SiC浆料。

    Abstract:

    The aqueous SiC slurry for gelatin gelcasting was prepared by submicron SiC, gelatin and TMAH as the main raw material. The effects of pH, sintering aid, dispersant, gelatin and solid content on rheological properties were studied. The results show that 12 is the best pH value of slurry. Sintering aid slightly increased the viscosity of the slurry. 0.6wt% TMAH got the lowest viscosity. Effect of gelatin concentration on viscosity is not obvious, and increasing the content of gelatin solution, the viscosity of slurry decreased. The viscosity of the slurry increased with the increasing of the solid content. When pH is 12, the dispersant content is 0.6wt%, adding 20 wt% concentration of 10 wt% gelatin, the SiC slurry can get the 55 wt% solid content, viscosity of 132 mPa.s which is conducive to the gel casting.

    参考文献
    相似文献
    引证文献
引用本文

张鑫,茹红强,岳新艳,王伟.固相烧结SiC凝胶注模用水基浆料流变性能的研究[J].稀有金属材料与工程,2018,47(S1):323~326.[Zhang Xin, Ru Hongqiang, Yue Xinyan, Wang Wei. Study on the Rheological Property of Aqueous and Solid-State-SinteredSiC Slurry for Gelatin Gelcasting[J]. Rare Metal Materials and Engineering,2018,47(S1):323~326.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-07-03
  • 最后修改日期:2017-07-03
  • 录用日期:2018-01-29
  • 在线发布日期: 2018-10-22
  • 出版日期: