+Advanced Search
Interface Compatibility During Different-Temperature Cu/NbTi Cladding Extrusion: Simulation and Experiment
Author:
Affiliation:

1.Engineering Research Center of Advanced Metal Composites Forming Technology and Equipment, Ministry of Education, Taiyuan 030024, China;2.College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan 030024, China;3.College of Mechanical and Electrical Engineering, Harbin Engineering University, Harbin 150001, China;4.College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China

Fund Project:

National Natural Science Foundation of China (51871070)

  • Article
  • | |
  • Metrics
  • |
  • Reference [25]
  • |
  • Related [20]
  • | | |
  • Comments
    Abstract:

    Different-temperature Cu/NbTi cladding extrusion was put forward where Cu and NbTi are different in temperature during plastic deformation. Different-temperature Cu/NbTi cladding extrusion can significantly lower the deformation temperature of Cu cladding layer so as to reduce the difference in yield stresses between Cu cladding layer and NbTi alloy core, which contributes to accommodating the deformation of the two metals. Rigid viscoplastic finite element method was used to simulate different-temperature Cu/NbTi cladding extrusion in order to reveal the interface compatibility between Cu cladding layer and NbTi alloy core, where various cone angles of bottom die, including 60°, 120° and 180°, were adopted. The results show that increasing the cone angle of bottom die contributes to reducing the relative elongation between Cu cladding layer and NbTi alloy core, which is conducive to the interface bonding between Cu cladding layer and NbTi alloy core. According to the optimal parameters from finite element simulation, Cu/NbTi cladding extrusion die with the cone angle of 180° can be used to implement Cu/NbTi cladding extrusion experiment. The experimental results show that stable flow of metal takes place during Cu/NbTi cladding extrusion, where Cu cladding layer and NbTi alloy core present compatible deformation and the relative elongation between them is small. The experimental results agree well with the simulated ones.

    Reference
    [1] Mathebula C, Matizamhuka W, Bolokang A S. The International Journal of Advanced Manufacturing Technology[J], 2020, 108: 23
    [2] Gehring D, Monroe J A, Karaman I. Scripta Materialia[J], 2020, 178: 351
    [3] Al-Zain Y, Kim H Y, Miyazaki S. Materials Science and Engineering A[J], 2015, 644: 95
    [4] Sun B, Meng X L, Gao Z Y et al. Journal of Alloys and Compounds[J], 2017, 715: 16
    [5] Okulov I V, Volegov A S, Attar H et al. Journal of the Mechanical Behavior of Biomedical Materials[J], 2017, 65: 866
    [6] Ibrahim M K, Hamzah E, Saud S N et al. Transactions of Nonferrous Metals Society of China[J], 2018, 28(4): 700
    [7] Helth A, Pilza S, Kirstena T et al. Journal of the Mechanical Behavior of Biomedical Materials[J], 2017, 65: 137
    [8] Santra S, Davies T, Matthews G et al. Materials & Design[J], 2019, 176: 107 836
    [9] Nijhuis A, Ilyin Y, Abbas W et al. Cryogenics[J], 2004, 44(5): 319
    [10] Bruzzone P, Stepanov B, Zapretilina E. Fusion Engineering and Design[J], 2005, 75?79: 111
    [11] Mousavi T, Grant P S, Speller S C et al. Materials Design[J], 2021, 198: 109 285
    [12] Wilson M N. Cryogenics[J], 2008, 48(7?8): 381
    [13] Li J F, Zhang P X, Liu X H et al. Physica C: Superconductivity and Its Applications[J], 2008, 468: 1840
    [14] Nannini M, Cloez H, Girar S et al. Fusion Engineering and Design[J], 2009, 84: 1404
    [15] Zhang Z Y, Matsumoto S, Choi S et al. Physica C: Superconductivity and Its Applications[J], 2011, 471: 1547
    [16] Li J F, Zhang P X, Liu X H et al. Physica C: Superconductivity and Its Applications[J], 2008, 468(15?20): 1840
    [17] Somerkoski J, Zignani C F, Marzi G D et al. Physics Proce- dia[J], 2012, 36(1): 1516
    [18] Guan M, Wang X Z, Zhou Y H. SpringerPlus[J], 2015, 4: 81
    [19] Zhou F, Cheng J S , Dai Y M et al. Physica C: Superconductivity and Its Applications[J], 2014, 498: 9
    [20] Guo Q, Zhang P X, Feng Y et al. Rare Metal Materials and Engineering[J], 2019, 48(12): 4113 (in Chinese)
    [21] Park S M, Oh Y S, Kim S Y et al. International Journal of Precision Engineering and Manufacturing[J], 2019, 20: 1563
    [22] Cheng J S, Wang Q L, Zhou F et al. IEEE Transactions on Applied Superconductivity[J], 2016, 26(7): 1
    [23] Stolyarov V V. Journal of Machinery Manufacture and Reliability[J], 2015, 44(4): 372
    [24] Zhao R L, Liu Y, Tian B H et al. Heat Treatment of Metals[J], 2011, 36(8): 17
    [25] Sun D, Jiang S Y, Yan B Y et al. Journal of Alloys and Compounds[J], 2020, 834: 155 010
    Cited by
    Comments
    Comments
    分享到微博
    Submit
Get Citation

[Sun Dong, Wang Zhe, Jiang Shuyong, Zhang Yanqiu. Interface Compatibility During Different-Temperature Cu/NbTi Cladding Extrusion: Simulation and Experiment[J]. Rare Metal Materials and Engineering,2023,52(2):441~447.]
DOI:10.12442/j. issn.1002-185X.20220437

Copy
Article Metrics
  • Abstract:430
  • PDF: 1037
  • HTML: 256
  • Cited by: 0
History
  • Received:May 18,2022
  • Revised:June 08,2022
  • Adopted:July 12,2022
  • Online: March 03,2023
  • Published: February 28,2023