| |
Volume 45,Issue 5,2016 Table of Contents
材料科学 | | | Microwave-assisted Synthesis of NiO/C and Its Capacitance Property | | | Zhang Chuanxiang | | | 2016,45(5):1093-1099 [Abstract(2316)] [View PDF] | | | | | Bonding Process and Application Properties of an Al-Ni layer composite sheet for Lithium-ion Battery Packaging | | | Yu Kun,Xiong Hanqing,Dai Yilong,Teng Fei,Fan Sufeng,Qiao Xueyan and Wen Li | | | 2016,45(5):1100-1105 [Abstract(1788)] [View PDF] | | | | | The Ostwald ripening behavior of Al8CeCu4 phase in Al-14Cu-7Ce alloy | | | Li Hai,Wang Zhixiu,Fang Bijun,Song Renguo and Zheng Ziqiao | | | 2016,45(5):1106-1110 [Abstract(1965)] [View PDF] | | | | | Effect of extrusion temperatures on microstructures and mechanical properties of Mg-6Zn-1Mn-4Sn-0.5Y alloy | | | huguangshan,张丁非,dongyufeng,jiangluyao and panfusheng | | | 2016,45(5):1111-1116 [Abstract(2315)] [View PDF] | | | | | High visible-light photocatalytic activity of nano γ-Fe2O3/TiO2 nanotube heterojunction arrays | | | Zhou Guanghong and Ding Hongyan | | | 2016,45(5):1117-1121 [Abstract(1698)] [View PDF] | | | | | Fraction and wear performances of 7475 aluminium alloy after anodic oxidation | | | KONG DEJUN | | | 2016,45(5):1122-1127 [Abstract(1602)] [View PDF] | | | | | One-step Synthesis of TiO2-hydroxyapatite Nano-films on NiTi alloy by a Hydrothermal Method | | | Fu Tao | | | 2016,45(5):1128-1131 [Abstract(2349)] [View PDF] | | | | | A New Method of Critical Failure Monitoring for the Heterogeneity Material Friction Welding Specimens Applying Multiple Physical Signals | | | Zhang Yubo,Xu Binshi,Wang Haidou,He Pengfei and Xing Zhiguo | | | 2016,45(5):1132-1137 [Abstract(1575)] [View PDF 1.07 M (1407)] | | | | | Microtructure and mechanical properties of TC18 Titanium alloy | | | Sun Shuyu and Lu Weijie | | | 2016,45(5):1138-1141 [Abstract(2103)] [View PDF 829.94 K (1902)] | | | | | The electrical transportation behavior of magnetron sputtered Al-Fe-Sn thin film | | | ZHAO GUAN NAN,ZHENG ZENG,GENG KAI JIE,ZHANG QING,ZHANG YONG and YAN BIAO | | | 2016,45(5):1142-1146 [Abstract(1586)] [View PDF] | | | | | Directional migration behavior of alloying element in the rafting process of the single crystal superalloy DD6 | | | ZhangShiming and ZhangQiaoxin | | | 2016,45(5):1147-1151 [Abstract(1629)] [View PDF] | | | | | The interface microstructure and formation mechanism of diamond abrasives laser brazed with Ni-Cr solders | | | Zhibo Yang,Aiju Liu,Shian Liu and Ruiyun Yang | | | 2016,45(5):1152-1156 [Abstract(1842)] [View PDF] | | | | | Effect of ball milling process on the in situ synthesizing of nano-TiB whiskers | | | Liu Liping,Liu Yongbing,Ji Lianfeng,Cao Zhanyi and Yang Xiaohong | | | 2016,45(5):1157-1161 [Abstract(1539)] [View PDF] | | | | | Microstructural evolution and properties of the aged Cu-3Ti-3Ni alloy | | | Jia Liu,Xianhui Wang,Tingting Guo,Juntao Zou and Xiaohong Yang | | | 2016,45(5):1162-1167 [Abstract(1874)] [View PDF] | | | | | Influence of asymmetric hot rolling on microstructure and mechanical property of Ti-6Al-4V alloy sheet | | | Li Jianping,Liu Zhenguang and Li Jing | | | 2016,45(5):1168-1174 [Abstract(2416)] [View PDF 812.42 K (1806)] | | | | | Mathematical Model of Coupled Thermal-stress about AZ31B Magnesium Alloy Plate during Hot Rolling | | | Jia Weitao,Ma Lifeng,Liu Pengtao,Xu Haijie and Jiang Yaping | | | 2016,45(5):1175-1181 [Abstract(1691)] [View PDF 606.90 K (1326)] | | | | | Density Functional Theory Study On Mg3N2 clusters adsorbed H | | | chen yu-hong and Li wen-qiang | | | 2016,45(5):1182-1188 [Abstract(1813)] [View PDF] | | | | | Investigation on Residual Stress and Fatigue Properties of the Cold Hole Expansion Process in Titanium Alloy TC21 Plates | | | Ge Ende,Fu Yucan,Su Honghua,Xu Jiuhua and Chen Xuemei | | | 2016,45(5):1189-1195 [Abstract(1837)] [View PDF] | | | | | Mechanical Anisotropy and Inhomogeneity through Thickness of 2297-T87 Aluminum Alloy Thick Plate | | | wanghaijin and zhengziqiao | | | 2016,45(5):1196-1203 [Abstract(1895)] [View PDF] | | | | | Discuss on the Life Prediction in Very High Cycle Fatigue Regime | | | Song Yanan,Xu Binshi,Wang Haidou,Zhang Yubo and Xing Zhiguo | | | 2016,45(5):1203-1208 [Abstract(1945)] [View PDF 544.38 K (1496)] | | | | | The properties and phase composition of (Ti,Al)N coating prepared by hollow cathode assisted multi-arc plating technology | | | wuhua and youshenshen | | | 2016,45(5):1209-1214 [Abstract(1796)] [View PDF] | | | | | Study on Microstructure of Laser Solid Forming K465 Superalloy | | | Li Qiuge,Lin Xin,Wang Xinghua,Liu Fenggang,Yang Haiou and Huang Weidong | | | 2016,45(5):1215-1219 [Abstract(1609)] [View PDF] | | | | | Aged tempture infulence on antisite defect in Al-9.0at%Li alloy | | | Zhang Jianjun,Zhang Dongbo,Xue Zhiyong,Zhang Jing and Chen Zheng | | | 2016,45(5):1220-1224 [Abstract(1828)] [View PDF 712.46 K (1498)] | | | | | Recrystallization Characterization of FGH96 Superalloy | | | Ning Yongquan | | | 2016,45(5):1225-1229 [Abstract(1697)] [View PDF] | | | | | Influence of Laser Peening and Shot Peening on Fatigue Properties of FGH97 Superalloy | | | Gao Yukui | | | 2016,45(5):1230-1234 [Abstract(2222)] [View PDF] | | | | | Research on defomation and fracture of Ni-Ti shape memory alloys under the penetration of pojectiles | | | zhangxiao and yangsuyuan | | | 2016,45(5):1235-1239 [Abstract(1708)] [View PDF] | | | | | Isothermal Section of Zr-Cr-Cu Ternary System at 700℃ | | | zhang min,ouyang yifang,yuan gaihuan,tang yiyuan,zhu jinming and liang jianlie | | | 2016,45(5):1240-1244 [Abstract(1927)] [View PDF] | | | | | Microstructure and damping of Mg97Zn1Y2 with or without solid solution treatment | | | Wan Diqing and Li zhumin | | | 2016,45(5):1245-1248 [Abstract(1583)] [View PDF 746.94 K (1360)] | | | | | Dielectric, Piezoelectric and Aging Properties of Multiferroic Ceramics BiFeO3-BaTiO3-PbTiO3 | | | Ning Haixia | | | 2016,45(5):1249-1252 [Abstract(1852)] [View PDF] | | | | | The distribution of P and its effects on the mechanical properties of DD6 alloy | | | yangjinxia | | | 2016,45(5):1253-1256 [Abstract(1868)] [View PDF] | | | | | Microstructure and Mechanical Properties of Ti-Al-Zr-Cr-N Bilayer Films Deposited by Multi-arc Ion Plating | | | Zhao Shilu,Zhang Zhen,Zhang Jun,Wang Shuanghong and Zhang Zhenggui | | | 2016,45(5):1320-1324 [Abstract(1518)] [View PDF] | | | |
材料工艺 | | | Influence of pulse parameters on the morphology and microstructure of gold electrodeposits | | | Lei Ting,Yuan Xinqiang,Wang Chengbo and Zheng Lishan | | | 2016,45(5):1257-1263 [Abstract(1771)] [View PDF] | | | | | INFLUENCE OF DIRECTIONALY SOLIDIFIED PROCESS ON POROSITY IN THE CROSS-SECTION TRANSITIONS OF Ni-BASED SUPERALLOY DZ417G | | | wangyongfeng,li jinguo,Meng xiangbin and liu xinggang | | | 2016,45(5):1264-1270 [Abstract(1582)] [View PDF] | | | | | Effect of surfactant on coelectrodeposition behavior of Ti-coated diamond-Ni composit | | | zhangli and wangrichu | | | 2016,45(5):1271-1277 [Abstract(1833)] [View PDF] | | | | | Aluminothermic Reduction of lunar soil simulant Ilmenite in Cryolite Molten Salt Media | | | Xie Kaiyu,Guan Pingping,Liu Aimin,Shi Zhongning,Hu Xianwei,Gao Bingliang and Wang Zhaowen | | | 2016,45(5):1278-1283 [Abstract(1639)] [View PDF] | | | | | Using new baffle to control defects in a vacuum investment-cast Ni-based turbine blade | | | Qin Ling,Shen Jun,Yang Gongxian,Li Qiudong and Fu Hengzhi | | | 2016,45(5):1284-1289 [Abstract(1522)] [View PDF] | | | | | Effect of intermediate layer on microstructure and mechanical properties of Ti/Al joint welded by friction stir welding | | | Zhang Xin,Chen Yuhua and Wang Shanlin | | | 2016,45(5):1290-1295 [Abstract(1762)] [View PDF] | | | | | Effect of Homogenizing annealing treatment on AZ91 magnesium alloy rolling deformation behavior | | | Zheng Liuwe,Liang Wei,Zhao Zilong,Li Yae,Wang Hongxia and Wang Yide | | | 2016,45(5):1296-1301 [Abstract(1679)] [View PDF] | | | | | Microstructure and Properties of Welded Joints of Low Density Niobium Alloy | | | Bai Run,Zheng Xin,Cai Xiaomei,Wang Feng,Xia Mingxing,Liu Hui and Li Laiping | | | 2016,45(5):1302-1308 [Abstract(1598)] [View PDF] | | | | | AN EXPERIMENTAL STUDY ON PERFORATION BEHAVIOR OF WF/ZR-BASED BULK METALLIC GLASS MATRIX COMPOSITE | | | duzhonghua,duchengxin,xialongxiang and Zhu Zheng Wang | | | 2016,45(5):1308-1313 [Abstract(1763)] [View PDF] | | | | | Electroplating of CLAM Steel by Aluminum in Ambient Temperature Chloroaluminate ionic liquids | | | Wang Wenxuan and Lu Guangda | | | 2016,45(5):1314-1319 [Abstract(1781)] [View PDF] | | | | | Study on the preparation of dense spherical molybdenum powders with high purity via induction plasma | | | liuxiaoping,wangkuaishe,huping and chenqiang | | | 2016,45(5):1325-1329 [Abstract(2099)] [View PDF] | | | | | Study on Genetic Characteristics of Morphology and Particle Size Distribution of WC-Co Composite Powder | | | guoshengda,Yang Jian-gao,Zhu Er-tao,Cheng Hao and Lv Jian | | | 2016,45(5):1330-1334 [Abstract(2271)] [View PDF] | | | | | Investigation on the Removal of Inclusions Form Aluminum Melt Using Alternating Combined Magnetic Field | | | Gao Minrui,Li Qiulin,Yang Dingguo and Liu Wei | | | 2016,45(5):1335-1339 [Abstract(1863)] [View PDF] | | | | | Annealing behaviors of Cu-Zn-Si alloy with nanotwins prepared by cryorolling | | | qinjia,Yang Xuyue and Ye Youxiong | | | 2016,45(5):1340-1344 [Abstract(2044)] [View PDF] | | | | | The Effect of Precursors on the Preparation of Ultrafine Nickel Powder by using Supercritical Methanol | | | li shuang ming,niu ming ju,ge xin,shen dian xu,wang huan,li wen xiu and yu san san | | | 2016,45(5):1345-1348 [Abstract(1737)] [View PDF] | | | | | Research on mechanism of corrosion resistance for Cu-30Ni-xRE(x=0~0.213) alloy | | | Mao Xiangyang | | | 2016,45(5):1349-1352 [Abstract(1773)] [View PDF] | | | | | Preliminary Study on the Process for Producing High-Purity Ruthenium used for sputtering target | | | zhangdeyu and liuweisheng | | | 2016,45(5):1353-1356 [Abstract(1421)] [View PDF] | | | |
评述
|
