| |
Volume 47,Issue 3,2018 Table of Contents
材料科学 | | | Simulation of electrodepositing process based on supercritical fluid and test research | | | Qian Haifeng,Lei Weining,Liu Weiqiao,Tan Heng and Shen Yu | | | 2018,47(3):717-722 [Abstract(1818)] [View PDF] | | | | | Corrosion behavior of W-Mo co-penetrated layer produced by glow discharge plasma technique in reducing acid | | | Fei Chen,Yulin Zhang,Weiguang Liu,Wenran Feng and Yingge Yang | | | 2018,47(3):723-728 [Abstract(1503)] [View PDF] | | | | | Effect of Mn doping on the electronic structure and absorption spectrum of Ba2SiO4: Eu2+ phosphor | | | Chen Haitao,Huang Xuefei and Huang Weigang | | | 2018,47(3):729-735 [Abstract(1370)] [View PDF] | | | | | Microstructure and Mechanical properties of AZ31B magnesium alloy prepared by solid -state recycling | | | wushuyan,jizesheng,huming,huangzhiqiu,tianchunying and wumingzhong | | | 2018,47(3):736-741 [Abstract(1326)] [View PDF] | | | | | Effect of Sr Modification on Microstructures and Mechanical Properties of Al3Ti/ADC12 Composites | | | Qing-jie Wu,Hong Yan,Yuan liu and Zhi Hu | | | 2018,47(3):742-747 [Abstract(1445)] [View PDF] | | | | | A Simple and Effective Process to Join Coated Superconductors at a Low Resistance | | | Zhang Han,Ma Guangtong,Li Xingtian,Peng Jinfang,Xu Zhibiao,Gong Tianyong and Zhu Minhao | | | 2018,47(3):748-753 [Abstract(1200)] [View PDF] | | | | | Effect of catalysts on hydrolysis hydrogen release of sodium borohydride | | | Zheng Xueping and Guo Maowen | | | 2018,47(3):754-758 [Abstract(1384)] [View PDF] | | | | | Surface Metallization of SiC Ceramic by Mo-Ni-Si Coatings for improving its wettability by molten Ag | | | Zhao Santuan,Zhang Xiangzhao,Liu Guiwu,Valenza Fabrizio,Muolo Maria Luigia,Qiao Guanjun and Passerone Alberto | | | 2018,47(3):759-765 [Abstract(1212)] [View PDF] | | | | | Effect of processing parameters on gelcasting process for Mo/Cu powders | | | DUAN Bohua | | | 2018,47(3):766-772 [Abstract(1114)] [View PDF] | | | | | The influence of hot extrusion and age treatment on the properties of biodegradable Mg-Zn-Y alloy | | | Qiao Xueyan,Yu Kun,Chen Liangjian,Dai Yilong,Xiao Tao,Deng Youwen,Shuai Cijun and Yan Yang | | | 2018,47(3):773-779 [Abstract(1451)] [View PDF] | | | | | Mechanical Property and Structures of Friction-Stir Weld Joint of 2195-T8 Al-Li Alloy Plate | | | Li Jin-feng,Chen Yong-lai,Zhang Xu-hu and Zheng Zi-qiao | | | 2018,47(3):780-787 [Abstract(1198)] [View PDF] | | | | | Effects of Ti sheet insert on microstructure and properties of graded composites of TiB2-based ceramic and Ti-6Al-4V steel | | | Chen Shuo,Zhao Zhongmin,Zhang Long,Cheng Zhaogang and Yu Guibo | | | 2018,47(3):788-793 [Abstract(1286)] [View PDF] | | | | | Studies on the correlation between microstructure and corrosion behavior of Zr-0.8Sn-1Nb-0.3Fe alloy | | | yangzhongbo | | | 2018,47(3):794-798 [Abstract(1234)] [View PDF] | | | | | Strength stability of aging hardened Mg-10Y-1.5Sm alloy | | | Zhang Qing,Chen Jun and Li Quan-an | | | 2018,47(3):799-802 [Abstract(1586)] [View PDF] | | | | | Effects of Ti on microstructure and high temperature mechanical properties of high-boron steel | | | Chen Xiang,Li Yanxiang,Wang Zhisheng,Zhang Huawei and Liu Yuan | | | 2018,47(3):803-809 [Abstract(1358)] [View PDF] | | | | | Study on hot deformation behavior of new high strength and toughness titanium alloy | | | Wang Zhe,Wang Xinnan,Shang Guoqiang,Zhu Liwei,Li Jing,Fei Yue,Tian Shuai and Zhu Zhishou | | | 2018,47(3):810-815 [Abstract(1517)] [View PDF] | | | | | Fracture Behaviour for the New βTiAl Alloy during the Hot Deformation | | | LuoYuanyuan,Mao Xiaonan,WuJinping,Yang Yingli,GuoDizi,SongFeifei and YangFan | | | 2018,47(3):816-821 [Abstract(1532)] [View PDF] | | | | | Indentation Size Effect in Molybdenum-Niobium Single Crystals of Different Crystallographic Orientations | | | ZhangWen,ZhangPingxiang,GaoXuanqiao,LiLaiping,HuZhongwu,ChengJun and ZhaoBin | | | 2018,47(3):822-828 [Abstract(1333)] [View PDF] | | | | | Spall microstructure evolution of Ti-6Al-4V and Ti-47Nb titanium alloys at the dynamic high-pressure loading | | | Liu Hui,Yu Xiaodong,Tan Chengwen,Zhao Huilin and Chen Xiujuan | | | 2018,47(3):829-834 [Abstract(1388)] [View PDF] | | | | | Modeling of the critical conditions on dynamic recrystallization for TiAl-based alloy | | | Wan Zhi-peng,Sun Yu,Hu Lian-xi and Yu Huan | | | 2018,47(3):835-839 [Abstract(1322)] [View PDF] | | | | | Interface Reactions between DD6 Single Crystal Superalloy and Al2O3 Molds | | | Yao Jiansheng,Li Xin,Wang Lili,Niu Shuxin,Liu Xiaoguang,Tang Dingzhong and Cao Chunxiao | | | 2018,47(3):840-845 [Abstract(1303)] [View PDF] | | | | | First-principles study of mechanical, electronic properties of the nickel-molybdenum binary compounds under pressure | | | Wang Juan,Hou Hua and Zhao Yuhong | | | 2018,47(3):846-852 [Abstract(1474)] [View PDF] | | | | | The nano Single crystal gamma - TiAl alloy strain rate effect of molecular dynamics simulation | | | LUO De-chun,FU Rong,Zhang ling,CAO Hui and RUI Zhi-yuan | | | 2018,47(3):853-859 [Abstract(1267)] [View PDF] | | | | | The effect of varying Al, Ti contents on the microstructure and corrosion resistance property of as-forged Incoloy825 alloy | | | Sun Nan,Wen Chen,Liu Zili and Liu Xiqin | | | 2018,47(3):860-866 [Abstract(1140)] [View PDF] | | | | | Study on Thermal Fatigue Damage of Tungsten under High Heat Load | | | madong and wangbo | | | 2018,47(3):867-870 [Abstract(1048)] [View PDF] | | | | | Micro-alloying Effects of Mn in 2297 Al-Li Alloy | | | Sang Fengjian,Zheng Ziqiao and Wang Haijin | | | 2018,47(3):871-877 [Abstract(1255)] [View PDF] | | | | | Deformation Characteristic and Microstructure Evolution of Spray Formed GH738 | | | Wang Yue,Xu Wenyong,Liu Na,Zheng Liang,Yuan Hua,Li Zhou and Zhang Guoqing | | | 2018,47(3):878-883 [Abstract(1259)] [View PDF] | | | | | Microstructure Model of AZ31 Magnesium Alloy Based on Cellular Automaton | | | chuzhibing,zhangduo,jianglianyun,malifeng,liyugui and huangqingxue | | | 2018,47(3):884-894 [Abstract(1469)] [View PDF] | | | | | Research and Comparasion on Precipitated Phases of High Mo Super Austenitic Stainless Steel and Ni-Cr-Mo Nickel-base Alloy | | | Song Zhigang,Xu Changzheng,Pu Enxiang,Miao Yanzhou,Ma Tianjun,Feng Han and Zheng Wenjie | | | 2018,47(3):895-903 [Abstract(1389)] [View PDF] | | | | | Study on Stress Corrosion Behavior and Cracking Mechanism of 2205 Duplex Stainless Steel in Acidic H2S Environment | | | Yang Shizhou,Li Chunfu,Li Hui and Wen Ping | | | 2018,47(3):904-909 [Abstract(1368)] [View PDF] | | | | | Effect of B content on environmental embrittlement of ordered (Fe,Co)3V alloys | | | Yang Biao,Chen Ye-xin and Li Shu-long | | | 2018,47(3):976-981 [Abstract(1298)] [View PDF] | | | |
材料工艺 | | | Microstructure and wear properties of Ni-based spray-welding layer on pure titanium TA1 surface | | | Wang Yan,He Qin,Xu Qiang and Xiong ZHong | | | 2018,47(3):910-914 [Abstract(1396)] [View PDF] | | | | | Formation mechanism of the tubular TiB in situ formed in TiB/Ti-6Al-4V composite coating by laser cladding. | | | Li Xueqiao,Jin Tounan,Du Shejun,Chang Lei,Lin Yinghua and Lei Yongping | | | 2018,47(3):915-919 [Abstract(1241)] [View PDF] | | | | | Residual Stress and its Influence at the Interface of Wire + Arc Additive Manufactured Titanium Alloy | | | Zhang Jikui,Chen Baihui and Zhang Xiang | | | 2018,47(3):920-926 [Abstract(1548)] [View PDF] | | | | | Interfacial Microstructure and Properties of TZM Alloy Joints Brazed Using Ti-28Ni Filler Metal | | | Tian Xiao,Zhao Hongyun,Song Xiaoguo,Han Guihai and Feng Jicai | | | 2018,47(3):927-931 [Abstract(1170)] [View PDF] | | | | | Effects of Trace Boron Addition on Microstructure and Properties of As-castTi6Al4V-xB Alloys | | | ZHANG Feiqi,CHEN Wenge and YAN Chaofeng | | | 2018,47(3):932-936 [Abstract(1453)] [View PDF] | | | | | Analysis of deformation stored energy and dynamic recrystallization behavior of pure tungsten processed by multiple direction forging | | | Sun Da-zhi,Li Ping,Lin Quan,Hua Rui,Xue Ke-min and Wu Yu-cheng | | | 2018,47(3):937-942 [Abstract(1407)] [View PDF] | | | | | Study on Electrical ContactSCharacteristics of Cu-Mo-WC Composites Sintering by SparkSPlasmaSSintering Process | | | Tian Bao-hong,Cheng Cin-le,Zhang Yi and Liu Yong | | | 2018,47(3):943-948 [Abstract(1181)] [View PDF] | | | | | Friction properties of multi-component CrTiAlN coating and its temperature effect | | | Lou Baiyang,Wang Xiaojing,Zhou Yan,XU Bin,Li Xiao and Wu Min | | | 2018,47(3):949-953 [Abstract(1255)] [View PDF] | | | | | Effect of Particle Size and Sintering Duration on the Structure and Magnetocaloric Effect of Plate-shaped LaFe11.44Si1.56 Hydrides in High-pressure H2 Atmosphere | | | Tong Yongli,Guo Jie,Ren Zengxin,Xu Zhijie and Sun Naikun | | | 2018,47(3):954-960 [Abstract(1257)] [View PDF] | | | | | Effects of long-term aging on microstructure and properties of a nickel-base alloy | | | WANG Lu,YANG Gang,LIU Zhen-dong,WANG Li,MA Longteng and YANG Zhiqiang | | | 2018,47(3):961-967 [Abstract(1539)] [View PDF] | | | | | Explosive Compact-coating Tungsten Copper Alloy To Copper Surface | | | chen Xiang,Li Xiaojie,Yan Honghao,Wang Xiaohong and Miao Yusong | | | 2018,47(3):968-971 [Abstract(1297)] [View PDF] | | | | | Effect of nitrogen–oxygen ratio on structure and optical properties of AlOxNy films | | | Jian–ping Meng,Miao Du,Xiao–peng Liu,Zhi–qiang Fu and Lei Hao | | | 2018,47(3):972-975 [Abstract(1324)] [View PDF] | | | | | Effect of fabrication temperature on the microstructure and mechanical property of 3D fabric reinforced Cf/Al composites* | | | Wang Zhenjun,Zhu Shixue,Yu Huan,Xu Zhifeng and Chen Xinwen | | | 2018,47(3):982-989 [Abstract(1285)] [View PDF] | | | | | Effect of Minor Alloying on the Glass Forming Ability of U-Co Alloy | | | Huang Huogen,Ke Haibo,Liu Tianwei,Zhang Pengguo,Tang Xiane and Wang Yingmin | | | 2018,47(3):990-994 [Abstract(1229)] [View PDF] | | | | | Effects of Thermal Diffusing DyZn Alloy Film on the Magnetic Properties and Heat Resistance for Sintered NdFeB Magnets | | | Li Jiajie,Guo Chengjun,Zhou Toujun,Liu Wujie,Chen Jinshui,Liu Renhui,Zhou Huijie and Yang Bin | | | 2018,47(3):995-1000 [Abstract(1552)] [View PDF] | | | | | Effect of Alloy Structure and the Magnetic Mix Doping Hf Elements and CNTs on Nanocrystalline Sm5Co19 Alloy | | | wangdongxin,qiaoyinkai,liudong,huagang,wanghaibin,liuxuemei and songxiaoyan | | | 2018,47(3):1001-1006 [Abstract(1191)] [View PDF] | | | | | Research on the Process and Properties of Tin Bronze Alloy Manufactured by Laser Selective Melting | | | BAI Yu-chao,YANG Yong-qiang,WANG Di,XIAO Ran and Liuyang | | | 2018,47(3):1007-1012 [Abstract(1267)] [View PDF] | | | |
评述 | | | Thermoelectric Behave Adjusted by Micro-structure Design of Materials | | | liuhongquan,cuizhiying,cuihongzhi,yuanting,guyijie,yuancunhui,xuehao and wangyanqiang | | | 2018,47(3):1013-1019 [Abstract(1769)] [View PDF] | | | | | Progress for the Properties and Processing of MgB2 Wires and Tapes | | | liuhaoran,yangfang,wangqingyang,xiongxiaomei,fengjianqing,lichengshan and zhoulian | | | 2018,47(3):1020-1024 [Abstract(1420)] [View PDF] | | | |
|
