+Advanced Search
Influence of Post-Weld Heat Treatment on Microstructure and Mechanical Properties of GH4169 Alloy Flash Butt Welded Joint
DOI:
Author:
Affiliation:

1.School of Materials and Metallurgy,Guizhou University;2.Guizhou Anda Aviation Forging Co,Ltd

Clc Number:

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    Samples of flash butt welded GH4169 alloy were investigated in this research. Experimental results indicate that redissolution happened to the strengthening phase γ″ and γ′ under the welding heat, so that the strength and microhardness of the weldingSzone are lower than that of the base metal (BM). After solid solution treatment, the strength of the BM is reduced to the same as that of the weldents, the uniform deformation between the welding zone and the BM can be realized during tensile deformation. The 1.2% tensile plastic deformation was carried out before or after solid solution on the weldments respectively, after completing aging heat treatment (720 ℃8 h(60 ℃/h)-620 ℃8 h AC (air cooling)), the tensile results show that a small amount of plastic deformation has little effect on its mechanical properties. After solution-ageingStreatment, the tensile strength of the pre-deformation weldments is similar to that of the BM, but the plastic index is lower, this is related to the coarse grains in the welding zone.

    Reference
    Related
    Cited by
Get Citation

[Jia-lin Shen, Xue-ru Zhu, Zhi-jian Wei, Yu Liang, Yi-long Liang, Fei-long Jiang, Zhi-xiang Xiao. Influence of Post-Weld Heat Treatment on Microstructure and Mechanical Properties of GH4169 Alloy Flash Butt Welded Joint[J]. Rare Metal Materials and Engineering,2018,47(12):3839~3847.]
DOI:[doi]

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:March 24,2017
  • Revised:May 22,2017
  • Adopted:June 23,2017
  • Online: January 04,2019
  • Published: