+Advanced Search
Comparative Study on Tribology Behavior of Titanium Alloy Drill Pipe under Simulated Working Conditions in Ultra-deep Well Drilling Conditions
Author:
Affiliation:

Clc Number:

Fund Project:

National Key R&D Program of China,Major science and technology project of CNPC(2021DJ2703),Natural Science Foundation of Shaanxi Provincial.(2021JM-607)

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    Titanium alloy has become a promising candidate material for oil country tubular goods(OCTG) and offshore components in rigorous service environment, owing to its high specific strength, low density, low elastic modulus, excellent toughness,fatigue and corrosion resistance. However, there is a lack of research on the friction and wear properties of titanium alloy drill pipes under ultra-deep drilling conditions, and the comparison research on the tribology performance and mechanism of titanium alloy drill pipes and steel drill pipes is few. In this paper, the friction and wear properties of three titanium alloy drill pipes and steel drill pipes are compared and analyzed through hardness test, impact wear test, reciprocating friction test, simulated condition wear test and microscopic analysis in simulating ultra-deep well conditions, and the wear mechanism of titanium alloy drill pipe under drilling conditions were also investigated, the results showed that the impact and wear resistance of titanium alloy drill pipes was lower than that of steel drill pipe materials, especially the impact resistance of titanium alloy drill pipe materials under medium-frequency impact. In the air reciprocating wear test, the friction coefficient of titanium alloy drill pipe was lower than that of steel drill pipe, when titanium alloy drill pipe wear against rock, it was a typical abrasive wear mechanism, and it is typical Adhesive wear when it wear against steel pipe. Under the simulated working condition of drilling fluid, the friction coefficient of titanium alloy drill pipe was significantly lower than that in air, and the friction coefficient of titanium alloy was the lowest when friction with rock under water-based drilling fluid conditions, and the wear resistance was the strongest, which was due to the fact that it was easier to form a dense passivation film with a lower friction coefficient on the surface of the titanium alloy in the water-based drilling fluid. It is recommended to use water-based drilling fluid when drilling with titanium alloy drill pipes, but because the wear of titanium alloy drill pipes under working conditions was still not as good as that of steel drill pipes, the next step is to conduct surface treatment on titanium alloy drill pipes to improve the wear resistance of titanium alloys.

    Reference
    Related
    Cited by
Get Citation

[Liu Qiang, XIE Jun-feng, Zhao Mifeng, Li Ning, Hu Fangting, Zhu Guochuan, Chen Jialei, Zhang Juantao, Song Shengyin, Yin Chengxian. Comparative Study on Tribology Behavior of Titanium Alloy Drill Pipe under Simulated Working Conditions in Ultra-deep Well Drilling Conditions[J]. Rare Metal Materials and Engineering,2023,52(1):195~205.]
DOI:10.12442/j. issn.1002-185X.20211118

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:December 14,2021
  • Revised:January 09,2022
  • Adopted:February 09,2022
  • Online: February 13,2023
  • Published: February 08,2023