+Advanced Search
Home > Archive>Volume 53, Issue 3, 2024 >778-786. DOI:10.12442/j.issn.1002-185X.20230107
PDF HTML XML Export Cite reminder
Microstructure and Properties of ZrC Enhanced Laser Cladding CoCrNi Alloy Cladding Layer
Author:
Affiliation:

1.School of Mechanical and Materials Engineering,North China University of Technology;2.Zhejiang Institute of Mechanical Electrical Engineering

  • Article
    • | |
  • Metrics
    • |
  • Reference [36]
    • |
  • Related [20]
    • | | |
  • Comments
    Abstract:

    ZrC strengthened CoCrNi-based laser cladded coatings with different content of ZrC were prepared on the surface of low carbon steel. The effects of ZrC addition on microstructure, hardness and wear resistance of CoCrni-based medium entropy alloy coating were investigated. The results show that there is a good metallurgical bond between the cladding layer and the matrix without obvious cracks and defects. The CoCrNi alloy coating without ZrC is composed of single-phase FCC structure. With the addition of ZrC in the coating, the coating phase compositions change to FCC+ ZrC0.7+Cr23C6+ZrO2 multiple phase structures. The grains of the coating were significantly refined, and the combination of grain boundary strengthening, solution strengthening and dispersion strengthening (Orowan) was realized, which effectively improved the hardness and wear resistance of the coating. However, ZrO2 produced by the combination of Zr in ZrC and O in the air also has an adverse effect on the performance of the coating, mainly because the presence of ZrO2 will cause the uneven distribution of particles in the coating and weaken the effect of dispersion strengthening. Therefore, when the content of ZrC is small, the performance of the coating is not improved. However, when ZrC content in the coating increases to 5wt.%, more ZrC0.7 phase is separated out from the coating, which can effectively improve the performance of the material. The hardness is 651±15 HV0.1 and the friction coefficient is 0.161 which is much lower owing to the synergetic strengthening effect.

    Reference
    [1] S. Washko, G. Aggen, Metals Handbook, in: Properties and Selection: Irons, Steels, and High Performance Alloys, vol. 1, ASM International, Materials Park, OH, 2002.
    [2] Yeh, J.-W., S.-K. Chen, S.-J. Lin, J.-Y. Gan, T.-S. Chin, T.-T. Shun, C.-H. Tsau, and S.-Y. Chang. Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes. Advanced Engineering Materials 6(5) 2004, 299–303.
    [3] Yao, M.J., K.G. Pradeep, C.C. Tasan, and D. Raabe. A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility. Scripta Materialia 72–73 2014, 5–8.
    [4] Dong, Yong, Xiaoxia Gao, Yiping Lu, Tongmin Wang, and Tingju Li. A multi-component AlCrFe2Ni2 alloy with excellent mechanical properties. Materials Letters, 169 2016, 62–64.
    [5] Moazzen, Parisa, Mohammad Reza Toroghinejad, and Pasquale Cavaliere. Effect of Iron content on the microstructure evolution, mechanical properties and wear resistance of FeXCoCrNi high-entropy alloy system produced via MA-SPS. Journal of Alloys and Compounds, 870 2021, 159410.
    [6] Huang, Sirui, Hao Wu, Heguo Zhu, and Zonghan Xie. In-situ TiC/Fe0.6MnNi1.4 medium entropy alloy matrix composites with excellent strength-ductility synergy. Ceramics International 47(18) 2021, 26319–26.
    [7] Zhao, Dechao, Tomiko Yamaguchi, Danjo Tusbasa, and Wenqin Wang. Fabrication and friction properties of the AlFeCrCo medium-entropy alloy coatings on magnesium alloy. Materials Design, 193 2020, 108872.
    [8] Ran Wei, Kaisheng Zhang, Liangbin Chen, Zhenhua Han, Tan Wang, Chen Chen, Jianzhong Jiang, Tingwei Hu, Fushan Li, Novel Co-free high performance TRIP and TWIP medium-entropy alloys at cryogenic temperatures, Journal of Materials Science Technology, Volume 57, 2020, 153-158
    [9] Pierson, Hugh O. Processing of Refractory Carbides and Nitrides (Powder, Bulk, and Fibers). Handbook of Refractory Carbides and Nitrides. Elsevier, 1996. 248–75.
    [11] J. Binner, M. Porter, B. Baker, J. Zou, V. Venkatachalam, V.R. Diaz, A. D’Angio’, P. Ramanujam, T. Zhang, S.R.C.M. Tammana, Selection, processing, properties and applications of ultra-high temperature ceramic matrix composites, UHTCMCs-a review[J], Int. Mater. Rev. 65 (7) (2020) 389–444
    [12] Hui Wang, Gaixia Wang, Fu Wang, Xuguang An, Yongqin Chang, Microstructure and tensile properties of nano-sized ZrC particle strengthened RAFM steels,Materials Science and Engineering: A,Volume 859, 2022, 144241
    [13] Xiaojuan Shang et al., ZrC reinforced refractory-high-entropy- alloy coatings: compositional design, synthesis, interstitials, and microstructure evolution effects on wear, corrosion and oxidation behaviors, Applied Surface Science, 564, 2021: 150466.
    [14] Liu, Tao, Yaran Niu, Xiaohui Pan, Minhao Shi, Xuebin Zheng, Jianding Yu, and Chuanxian Ding. Laser ablation behaviors of vacuum plasma sprayed ZrC‐based coatings. Journal of the American Ceramic Society, 102(7) 2019, 4247–58.
    [15] ?. Szparaga, P. Bartosik, A. Gilewicz, K. Myd?owska, J. Ratajski, Optimisation of mechanical properties of ZrC multilayer coatings[J], Thin Solid Films 704 (2020), 138016
    [16] J. Ren, E. Feng, Y. Zhang, J. Zhang, D. Ding, L. Li, Influences of deposition temperature, gas flow rate and ZrC content on the microstructure and anti-ablation performance of CVD-HfC-ZrC coating[J], Ceram. Int. 47 (2021) 556–566
    [17] Liu Ran, Xianting Dang, Yating Peng, and Tao Wu. Microstructure and Wear Behavior of Laser Cladded CoCrNiMox Coatings on the Low Carbon Steel. Crystals 12(9) 2022, 1229.
    [18] Muangtong, P. , Rodchanarowan, A. , Chaysuwan, D. , Chanlek, N. , Goodall, R.. The corrosion behaviour of cocrfeni-x (x = cu, al, sn) high entropy alloy systems in chloride solution.SCorrosion Science: The Journal on Environmental Degradation of Materials and its Control (Aug.), 172.
    [19] H. Kotan, G. Polat, A.B. Yildiz, Effect of Hf additions on phase transformation, microstructural stability, and hardness of nanocrystalline 304L stainless steels synthesized by mechanical alloying, Adv. Powder Technol. 32 (8) (2021) 3117–3124
    [20] Kotan, Hasan and Kris A. Darling. A study of microstructural evolution of Fe-18Cr-8Ni, Fe-17Cr-12Ni, and Fe-20Cr-25Ni stainless steels after mechanical alloying and annealing. Materials Characterization, 138 2018, 186–94.
    [21] Hou, Xiuli, Zhanyi Cao, Lei Zhao, Lidong Wang, Yaoming Wu, and Limin Wang. Microstructure, texture and mechanical properties of a hot rolled Mg–6.5Gd–1.3Nd–0.7Y–0.3Zn alloy. Materials Design, 34 2012, 776–81.
    [22] Xiao, D.H., P.F. Zhou, W.Q. Wu, H.Y. Diao, M.C. Gao, M. Song, and P.K. Liaw. Microstructure, mechanical and corrosion behaviors of AlCoCuFeNi-(Cr,Ti) high entropy alloys. Materials Design, 116 2017, 438–47.
    [23] K. Oura, V.G. Lifshifts, A.A. Saranin, A.V. Zotov, M. Katayama, Surface Science, Springer-Verlag, Berlin Heidelberg New York, 2003, p. 104.
    [24] Wang, Zhongke, Qiguang Zheng, Desheng Xu, Zengyi Tao, Dafu Li, Tao Wang, and Jianhui Gu. Behavior characteristics of particle phases in laser cladding WC-TiC-TaC/Co-based ceramic-metal composite coating. in Fuxi Gan, Horst Weber, Zaiguang Li, and Qingming Chen (eds). presented at the conference International Symposium on Industrial Lasers, Wuhan, China, September 1999. 363.
    [25] Dong, Q. Z. , Zhang, X. Y. , Hu, J. D. , Lian, J. S. , Liu, D. W. . In-situ growth mechanism of tic particles in tic particles reinforced ni-matrix composite laser cladding layer.S Applied Laser, 2001(04): 237-239 236
    [26] D.Shangguan,S.Ahuja,D.M.Stefanescu. An analytical model for the interaction between an insoluble particle and an advancing solid/liquid interface[J]. Metallurgical Transactions A, 1992, 23(2): 669-680.
    [27] Mohanty, P. S., and J. Mazumder. Solidification behavior and microstructural evolution during laser beam material interaction.SMetallurgical Materials Transactions B, 29. 6(1998): 1269-1279.
    [28] Glicksman M E. Principles of solidification: An introduction to modern casting and crystal growth concepts[J]. 2011.
    [29] Koch, C.C. Synthesis of nanostructured materials by mechanical milling: problems and opportunities. Nanostructured Materials 9(1–8) 1997, 13–22.
    [30] Fu, Zhiqiang, Weiping Chen, Haiming Wen, Dalong Zhang, Zhen Chen, Baolong Zheng, Yizhang Zhou, and Enrique J. Lavernia. Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7.5Cu17.5 high-entropy alloy. Acta Materialia, 107 2016, 59–71.
    [31] H. Kotan, K.A. Darling, M. Saber, R.O. Scattergood, C.C. Koch, Thermal stability and mechanical properties of nanocrystalline Fe–Ni–Zr alloys prepared by mechanical alloying, J. Mater. Sci. 48 (24) (2013) 8402–8411
    [32] Wen, Cheng, Changxin Wang, Yan Zhang, Stoichko Antonov, Dezhen Xue, Turab Lookman, and Yanjing Su. Modeling solid solution strengthening in high entropy alloys using machine learning. Acta Materialia, 212 2021, 116917.
    [33] B. Tu, H. Wang, Y. Wang, R. Li, L.Z. Ouyang, R.H. Tang, Optimizing Ti–Zr–Cr–Mn–Ni–V alloys for hybrid hydrogen storage tank of fuel cell bicycle, Int. J. Hydrogen Energy 47 (2022) 14952–1496
    [34] G.X. Qiu, X.L. Wei, C. Bai, D.J. Miao, L. Cao, X.M. Li, Inclusion and mechanical properties of ODS-RAFM steels with Y, Ti, and Zr fabricated by melting, Nucl. Eng. Technol., 2022, 54(7): 2376-2385
    [35] Millett, Paul C., R. Panneer Selvam, and Ashok Saxena. Stabilizing nanocrystalline materials with dopants. Acta Materialia, 55(7) 2007, 2329–36.
    [36] Yamasaki, Tohru. High-strength nanocrystalline Ni-W alloys produced by electrodeposition and their embrittlement behaviors during grain growth. Scripta Materialia, 44(8–9) 2001, 1497–1502.
    [37] Guo, Yaxiong, Xiaojuan Shang, and Qibin Liu. Microstructure and properties of in-situ TiN reinforced laser cladding CoCr2FeNiTi high-entropy alloy composite coatings. Surface and Coatings Technology, 344 2018, 353–58.
    Cited by
    Comments
    Comments
    分享到微博
    Submit
Get Citation

[Ran Liu, Xianting Dang, Chuqi Chen, Tao Wu. Microstructure and Properties of ZrC Enhanced Laser Cladding CoCrNi Alloy Cladding Layer[J]. Rare Metal Materials and Engineering,2024,53(3):778~786.]
DOI：10.12442/j. issn.1002-185X.20230107

Copy
Article Metrics
  • Abstract:297
  • PDF: 881
  • HTML: 0
  • Cited by: 0
History
  • Received:March 03,2023
  • Revised:April 26,2023
  • Adopted:April 27,2023
  • Online: March 27,2024
  • Published: March 20,2024

Total visitors：12800785

Address：96 weiyanglu, xi'an,Shaanxi, P.R.China Postcode：710016 ServiceTel：0086-26-86231117

E-mail：rmme@c-nin.com

Copyright:Rare Metal Materials and Engineering ® 2025 All Rights Reserved Support:Beijing E-Tiller Technology Development Co., Ltd. ICP: